TC Clutch Chatter

[David Spiegel]

My TC has developed a noticeable clutch chatter while in reverse gear. No matter how delicate I am on the pedal, it still chatters. Both the clutch plate and release bearing have been replaced and have about 1000 miles on them. I would appreciate any advice. Thanks DaveTC 6551 Sent from Yahoo Mail for iPad

[Gene Gillam]

Good chance there s a broken rear gearbox mount (Moss Motors pt/no 410-040)...common problem and the mount can be repaired by aluminum welding. Gene GillamSaucier, MS Sent from my iPad

On Sep 4, 2019, at 8:02 PM, David Spiegel de00041@yahoo.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote:

  My TC has developed a noticeable clutch chatter while in reverse gear. No matter how delicate I am on the pedal, it still chatters. Both the clutch plate and release bearing have been replaced and have about 1000 miles on them. I would appreciate any advice. Thanks DaveTC 6551 Sent from Yahoo Mail for iPad

[Bob Grunau]

Attachments :

[*][url=file:///C:\Users\Steve\AppData\Local\PG Offline 4\Attachments\\MG Parts doc-92065.doc]MG Parts doc-92065.doc[/url]

Agreed, the TC Rear plate breaks often. Welding is OK, but add a steel re-inforcing plate behind the repaired aluminium plate to strengthen the plate. Yes I sell the kit, see attached.

Thanks, Bob

 

Bob Grunau

150 Pinewood Trail,

Mississauga, Ontario

Canada, L5G-2L1

905-274-4136

 

.

 

[b]From:[/b] mg-tabc@yahoogroups.com [mailto:mg-tabc@yahoogroups.com] [b]On Behalf Of [/b]Gene Gillam anngene@bellsouth.net [mg-tabc] [b]Sent:[/b] Wednesday, September 04, 2019 10:25 PM [b]To:[/b] David Spiegel [b]Cc:[/b] Mg-tabc [b]Subject:[/b] Re: [mg-tabc] TC Clutch Chatter

 

 

Good chance there s a broken rear gearbox mount (Moss Motors pt/no 410-040)...common problem and the mount can be repaired by aluminum welding.

 

Gene Gillam

Saucier, MS

Sent from my iPad

On Sep 4, 2019, at 8:02 PM, David Spiegel de00041@yahoo.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote:

 

My TC has developed a noticeable clutch chatter while in reverse gear. No matter how delicate I am on the pedal, it still chatters. Both the clutch plate and release bearing have been replaced and have about 1000 miles on them. I would appreciate any advice. Thanks

 

Dave

TC 6551

Sent from Yahoo Mail for iPad