Woodscrews.

[David Lodge]

Does anybody know if/where stainless steel screws for the body tub are available?

Regards, Lodge, TC 1704, in suddenly cold again Vancouver.

[Robert FzMG]

David - try these guys.   http://vancouverbolt.com Best regards,  Robert Ford

On Mar 25, 2019, at 7:50 PM, David Lodge emmgeeteesee@gmail.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote: Does anybody know if/where stainless steel screws for the body tub are available? Regards, Lodge, TC 1704, in suddenly cold again Vancouver.

[Michael Ponsano]

From the Frame up has everything that you need

[Bill Hyatt]

Dave, Any marine supply store should have a good selection of s/s screws both slotted & Phillips head in wood screw or self tapping. Even silicone bnz.  For ultimate rot protection set screws in epoxy. Set screw, remove then using a pipe cleaner saturate hole with epoxy & reinstall screw into wet hole. Wedging action screw threads forces epoxy deep into wood fibers waterproofing grip area from condensation on threads due to temperature changes. -Bill HyattTC 4926Sent from my iPhone

On Mar 25, 2019, at 10:56 PM, Robert FzMG robfzmg@outlook.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote:

  David - try these guys.   http://vancouverbolt.com Best regards,  Robert Ford On Mar 25, 2019, at 7:50 PM, David Lodge emmgeeteesee@gmail.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote: Does anybody know if/where stainless steel screws for the body tub are available? Regards, Lodge, TC 1704, in suddenly cold again Vancouver.

[David Lodge]

Thanks, Bill! I once read somewhere that they should be dipped in Waxoyl, but what's the point of that if they're stainless? Thanks to all who responded!

On Tue, 26 Mar 2019 at 07:40, Bill Hyatt usaj24@earthlink.net> wrote: Dave, Any marine supply store should have a good selection of s/s screws both slotted & Phillips head in wood screw or self tapping. Even silicone bnz. For ultimate rot protection set screws in epoxy. Set screw, remove then using a pipe cleaner saturate hole with epoxy & reinstall screw into wet hole. Wedging action screw threads forces epoxy deep into wood fibers waterproofing grip area from condensation on threads due to temperature changes. -Bill HyattTC 4926Sent from my iPhone On Mar 25, 2019, at 10:56 PM, Robert FzMG robfzmg@outlook.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote: David - try these guys. http://vancouverbolt.com Best regards, Robert Ford On Mar 25, 2019, at 7:50 PM, David Lodge emmgeeteesee@gmail.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote: Does anybody know if/where stainless steel screws for the body tub are available? Regards, Lodge, TC 1704, in suddenly cold again Vancouver.

[Norman Verona]

David it's to protect the wood not the screw. tel: 0044 741 9905 741 [b]From:[/b] mg-tabc@yahoogroups.com mg-tabc@yahoogroups.com> on behalf of David Lodge emmgeeteesee@gmail.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> [b]Sent:[/b] Tuesday, March 26, 2019 11:59:03 PM [b]To:[/b] Bill Hyatt [b]Cc:[/b] Robert FzMG; mg-tabc@yahoogroups.com [b]Subject:[/b] Re: [mg-tabc] Woodscrews.     Thanks, Bill!  I once read somewhere that they should be dipped in Waxoyl, but what's the point of that if they're stainless? Thanks to all who responded!

On Tue, 26 Mar 2019 at 07:40, Bill Hyatt usaj24@earthlink.net> wrote: Dave,  Any marine supply store should have a good selection of s/s screws both slotted & Phillips head in wood screw or self tapping. Even silicone bnz.  For ultimate rot protection set screws in epoxy. Set screw, remove then using a pipe cleaner saturate hole with epoxy & reinstall screw into wet hole. Wedging action screw threads forces epoxy deep into wood fibers waterproofing grip area from condensation on threads due to temperature changes. -Bill Hyatt TC 4926 Sent from my iPhone On Mar 25, 2019, at 10:56 PM, Robert FzMG robfzmg@outlook.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote:   David - try these guys.   http://vancouverbolt.com Best regards,  Robert Ford On Mar 25, 2019, at 7:50 PM, David Lodge emmgeeteesee@gmail.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote: Does anybody know if/where stainless steel screws for the body tub are available? Regards, Lodge, TC 1704, in suddenly cold again Vancouver.