Page 1 of 1
TA steering excluder, inner plate
Posted: Wed Mar 06, 2019 11:13 am
by doug fromtheframeup.com
Can anyone provide a tracing with holes for the TA inner plate, steering excluder, holes have captive nuts. Or a sample to loan would be good also. Thanks, [b][i]Doug Pelton,[/i][/b] Proprietor [b][i] [/i][/b] From The Frame Up 3030 S. 40th St., Suite 5 Phoenix, AZ 85040 480-588-8185 For Fastest Service:
order@fromtheframeup.com Like us on FACEBOOK! See us on YouTUBE! www.FromTheFrameUp.com
Re: TA steering excluder, inner plate
Posted: Fri Mar 08, 2019 3:19 pm
by doug fromtheframeup.com
Attachments :
Thanks Dick and others who have offered assistance. I have a tracing inbound, so all set.
Regards to all,
[b][i]Doug Pelton,[/i][/b] Proprietor
[b][i] [/i][/b]
From The Frame Up
3030 S. 40th St., Suite 5
Phoenix, AZ 85040
480-588-8185
For Fastest Service:
order@fromtheframeup.com
Like us on FACEBOOK!
See us on YouTUBE!
www.FromTheFrameUp.com
[b]From:[/b] dick little vze4xyru@gmail.com>
[b]Sent:[/b] Friday, March 8, 2019 3:23 PM
[b]To:[/b] doug fromtheframeup.com doug@fromtheframeup.com>
[b]Subject:[/b] Re: [mg-tabc] TA steering excluder, inner plate
Hi Doug,
If no one helps about the TA inner plate, I'll pull mine and measure it.
Let me know any time if you have no other route to get the info.
The TA is in its winter den at the moment
Best wishes,
Dick Little
On Wed, Mar 6, 2019 at 5:45 PM doug
fromtheframeup.com doug@fromtheframeup.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote: