Wilsons Sandbox

Robin, where are you? tel: 0044 741 9905 741 [b]From:[/b] mg-tabc@yahoogroups.com mg-tabc@yahoogroups.com> on behalf of birdforth@googlemail.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> [b]Sent:[/b] Thursday, February 14, 2019 10:07:40 AM [b]To:[/b] mg-tabc@yahoogroups.com [b]Subject:[/b] [mg-tabc] MG TC master cylinder     Best place and price please for master cylinder MG TC 1948. Thank you, robin

Roger, Lynne says I can restore her I'll be rebuilding an xpag in April and will do a blog in the form of a workshop manual. That'll keep me busy for a while. tel: 0044 741 9905 741 [b]From:[/b] mg-tabc@yahoogroups.com mg-tabc@yahoogroups.com> on behalf of Roger Bateman rogerbateman@rocketmail.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> [b]Sent:[/b] Thursday, February 14, 2019 10:54:06 AM [b]To:[/b] mg-tabc@yahoogroups.com [b]Subject:[/b] Re: [mg-tabc] MG TC master cylinder     Hi Norman, Good to hear from you! This, plus the recent flurry of posts about camshaft removal, makes me realise how quiet the forum has been since you completed your TC. I don t suppose you could start another restoration project?? Cheers, Roger.

HI Robin,

 

Our company is the manufacturer for the TABC Master Cylinder, item # BR192. We also manufacture all the brake lines and many of the other associated parts. For more information see our website / catalog / Brakes section.

 

Best regards,

 

[b][i]Doug Pelton,[/i][/b] Proprietor

[b][i]  [/i][/b]

From The Frame Up

3030 S. 40th St., Suite 5

Phoenix, AZ 85040

 

480-588-8185

For Fastest Service:  order@fromtheframeup.com

Like us on FACEBOOK!

See us on YouTUBE!

 

www.FromTheFrameUp.com

 

[b]From:[/b] mg-tabc@yahoogroups.com mg-tabc@yahoogroups.com> [b]On Behalf Of [/b]birdforth@googlemail.com [mg-tabc] [b]Sent:[/b] Thursday, February 14, 2019 3:08 AM [b]To:[/b] mg-tabc@yahoogroups.com [b]Subject:[/b] [mg-tabc] MG TC master cylinder

 

 

Best place and price please for master cylinder MG TC 1948. Thank you, robin

Past Parts in Bury St Edmunds can recondition them if they are not too far gone.JohnTC 3621 Cambridge UK Sent from my iPhone

On 14 Feb 2019, at 10:07, birdforth@googlemail.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote:

  Best place and price please for master cylinder MG TC 1948. Thank you, robin

C&C Parts in the Netherlands is a good source. http://ccparts.nl John Seim Irvine, CA

> On Feb 14, 2019, at 9:40 AM, Graham Knight graham.knight5@gmail.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote: > > I think the M.G. Octagon Car Club does a nice bronze one. > > Graham > > > > ------------------------------------ > Posted by: Graham Knight graham.knight5@gmail.com> > ------------------------------------ > > > ------------------------------------ > > Yahoo Groups Links > > >