TC tranny

Post Reply
Barry Cook
Posts: 12
Joined: Mon Apr 05, 2010 8:39 pm

TC tranny

Post by Barry Cook » Sat Oct 06, 2018 11:30 am

OH NO!  I finished buttoning up the tranny and I think I put a washer in the wrong place???   I take pictures of everything while removing all parts on the car but this one is not clear.  And this may be critical? 
 The best way to explain this is go to Moss TC transmission catalog diagram and look for items 14, 15, 16, & 17, lower center of page, the reverse gear link.  The item in question is number 16 the washer.  Does this washer go between the reverse gear link and the cast iron housing, or between the cast house housing and the exterior castle nut?  My guess now, after the fact, it goes inside the housing and serves as a bearing for the link?  Not sure because I thought it was behind the castle nut when taking everything apart. 
Appreciate your answer from those that also tackled the tranny.
Barry Cook

Bob Grunau
Posts: 149
Joined: Wed Oct 29, 2003 10:26 am

Re: TC tranny

Post by Bob Grunau » Sat Oct 06, 2018 12:12 pm

No worries, it goes OUTSIDE behind the castle nut. Looked a two TC G/B, both have washer outside ,

Bob

 

Bob Grunau

150 Pinewood Trail,

Mississauga, Ontario

Canada, L5G-2L1

905-274-4136

 

 

 

 

[b]From:[/b] mg-tabc@yahoogroups.com [mailto:mg-tabc@yahoogroups.com] [b]On Behalf Of [/b]Barry Cook barryc8950@yahoo.com [mg-tabc] [b]Sent:[/b] Saturday, October 06, 2018 2:29 PM [b]To:[/b] MG-TABC List [b]Subject:[/b] [mg-tabc] TC tranny

 

 

OH NO!  I finished buttoning up the tranny and I think I put a washer in the wrong place???   I take pictures of everything while removing all parts on the car but this one is not clear.  And this may be critical? 

 The best way to explain this is go to Moss TC transmission catalog diagram and look for items 14, 15, 16, & 17, lower center of page, the reverse gear link.  The item in question is number 16 the washer.  Does this washer go between the reverse gear link and the cast iron housing, or between the cast house housing and the exterior castle nut?  My guess now, after the fact, it goes inside the housing and serves as a bearing for the link?  Not sure because I thought it was behind the castle nut when taking everything apart. 

Appreciate your answer from those that also tackled the tranny.

 

Barry Cook

 

 


Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests