Wilsons Sandbox

Hi Folks, Is anyone aware of a repro serial number (chassis) plate that has [b]TB [/b]pre-etched in the number box? Thanks.... tommm in Ohio

If you are talking about the TB makers plate, I have these in stock. ID069 perfect as original.

 

[b][i]Doug Pelton,[/i][/b] Proprietor

 

[b][i]NOTE: New Address[/i][/b]

From The Frame Up

3030 S. 40th St., Suite 5

Phoenix, AZ 85040

 

480-588-8185

For Fastest Service:  order@fromtheframeup.com

Like us on FACEBOOK!

See us on YouTUBE!

 

www.FromTheFrameUp.com

 

[b]From:[/b] mg-tabc@yahoogroups.com mg-tabc@yahoogroups.com> [b]On Behalf Of [/b]Tom Metcalf mgtom@zoominternet.net [mg-tabc] [b]Sent:[/b] Wednesday, September 26, 2018 11:28 AM [b]To:[/b] MG mg-tabc@yahoogroups.com> [b]Subject:[/b] [mg-tabc] MG TB source

 

 

Hi Folks, Is anyone aware of a repro serial number (chassis) plate that has [b]TB [/b]pre-etched in the number box? Thanks....   tommm in Ohio

Tommm - you could try id-plates.org who are in France and say they can produce anything. A while back lots of plates came up on ebay, made in Australia. Not there now or on Google but maybe somebody down-under knows them. oc[b]T[/b]agonally Roger

On Wed, Sep 26, 2018 at 7:28 PM, Tom Metcalf mgtom@zoominternet.net [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote: [u][/u] Hi Folks, Is anyone aware of a repro serial number (chassis) plate that has [b]TB [/b]pre-etched in the number box? Thanks.... tommm in Ohio

Thanks Roger. I remember those. I'll give Doug's a try first. tommm

On 9/26/2018 2:56 PM, Roger Furneaux wrote:

Tommm - you could try id-plates.org who are in France and say they can produce anything. A while back lots of plates came up on ebay, made in Australia. Not there now or on Google but maybe somebody down-under knows them. oc[b]T[/b]agonally Roger On Wed, Sep 26, 2018 at 7:28 PM, Tom Metcalf mgtom@zoominternet.net [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote: Hi Folks, Is anyone aware of a repro serial number (chassis) plate that has [b]TB [/b]pre-etched in the number box? Thanks.... tommm in Ohio

Attachments :

[*][url=file:///C:\Users\Steve\AppData\Local\PG Offline 4\Attachments\\ID064.JPG]ID064.JPG[/url]

This?

 

[b][i]Doug Pelton,[/i][/b] Proprietor

 

[b][i]NOTE: New Address[/i][/b]

From The Frame Up

3030 S. 40th St., Suite 5

Phoenix, AZ 85040

 

480-588-8185

For Fastest Service:  order@fromtheframeup.com

Like us on FACEBOOK!

See us on YouTUBE!

 

www.FromTheFrameUp.com

 

[b]From:[/b] mg-tabc@yahoogroups.com mg-tabc@yahoogroups.com> [b]On Behalf Of [/b]Tom Metcalf mgtom@zoominternet.net [mg-tabc] [b]Sent:[/b] Wednesday, September 26, 2018 12:01 PM [b]To:[/b] Roger Furneaux roger.46tc@gmail.com> [b]Cc:[/b] MG mg-tabc@yahoogroups.com> [b]Subject:[/b] Re: [mg-tabc] MG TB source

 

 

Thanks Roger. I remember those.  I'll give Doug's a try first.  tommm On 9/26/2018 2:56 PM, Roger Furneaux wrote:

Tommm - you could try id-plates.org who are in France and say they can produce anything.

 

A while back lots of plates came up on ebay, made in Australia. Not there now or on Google but maybe somebody down-under knows them.

 

oc[b]T[/b]agonally

 

Roger

 

On Wed, Sep 26, 2018 at 7:28 PM, Tom Metcalf mgtom@zoominternet.net [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote:

 

Hi Folks,

Is anyone aware of a repro serial number (chassis) plate that has [b]TB [/b]pre-etched in the number box?

Thanks....   tommm in Ohio