Wilsons Sandbox

Posted: **Thu Aug 23, 2018 7:15 am**

Good afternoon MGers

I am wiring the dash panel and have a query about the clock. It has one connection which I assume is power. Should I earth it via one of the screws fixing to the body of the re counter or ?

You may ask why I am bothering as they seem to work for a maximum of 2 minutes.

Thanks

Geoff

TC 6996

Sunny Suffolk UK

Posted: **Thu Aug 23, 2018 8:53 am**

Geoff, Yes, it needs an earth wire. The loom has a bunch of black wires that earth to the screws on the tacho holding posts. One of the black wires is esrthed to the chassis. Norman Verona Mob: 0741 9905 741 Web: [url=http://www.frenchblat.com]www.frenchblat.com[/url] Sent from BlueMail

On Aug 23, 2018, at 15:15, "'Geoff Broad' broadassociates@btinternet.com [mg-tabc]" mg-tabc-noreply@yahoogroups.com> wrote:
Good afternoon MGers

I am wiring the dash panel and have a query about the clock. It has one connection which I assume is power. Should I earth it via one of the screws fixing to the body of the re counter or ?

You may ask why I am bothering as they seem to work for a maximum of 2 minutes.

Thanks

Geoff
TC 6996
Sunny Suffolk UK

Wilsons Sandbox

Clock wiring

Clock wiring

Re: Clock wiring