Re Windscreen fastener length
Posted: Wed Jun 13, 2018 11:29 am
Yes, be careful of the fastener lengths!
I had a local glass shop make a new windscreen for my TC. It was
difficult getting the packing and glass into the frame. My dad
holding one side of the frame, my mom on the other side and me trying
to fit the glass. Finally got it, but then the long screw into the
short place...crunch...a small circular crack in a lower corner.
That was 50 years ago; the crack still there as a fond memory of that
day.
Bill Traill
San Jose, California.
On 13 Jun 2018 at 11:56, Joe Curto joecurto@aol.com [mg-tabc] wrote: > > > > Word to the wise make sure screws are correct length as if to long > they will snap the glass > > > Joe Curto > 718-762-7878 > www.joecurto.com > > > > > -----Original Message----- > From: 'Robert F.Butson' email@robbut.plus.com [mg-tabc] > mg-tabc-noreply@yahoogroups.com> > To: mg-tabc mg-tabc@yahoogroups.com> > Sent: Wed, Jun 13, 2018 11:51 am > Subject: [mg-tabc] Windscreen > >