Wilsons Sandbox

Posted: **Tue Jan 09, 2018 11:49 am**

I wasn't going to do this, again, but I've got extra tools from having to buy batches at a time, in the past, when I only wanted one of something and so wound up with extras. The trays were recently discounted after a previous increase ($225.00+ shipping), so I'm in the process of finding the missing ones and should have all by the end of the month (England, Cypress, Australia, etc.). I'll probably put them on ebay, unless I get some interest from the group; about 90% correct, as some are very difficult to find and when you do find them, veddy spensive; the trays are more than $200.00, but I think closest to the originals. Jan W.G. Johnson/Farifield, Ohio

Posted: **Fri Jan 12, 2018 3:18 am**

Hi Jan,

Do you have any empty tool trays for sale. I have most of the tools, but no trays.

Regards,

Ron Benson

Posted: **Fri Jan 12, 2018 3:55 am**

Hi Ron,

Not sure if he is still making them but I got mine from Ian Pooley from Tenterden - 01580 764442. It was about 10 years ago though.

Has anyone communicated with Ian recently? The moulds he used were good so hopefully if he has stopped making them someone has the moulds and is still producing the trays.

Regards,

Jeff

[b]From:[/b] mg-tabc@yahoogroups.com mg-tabc@yahoogroups.com> on behalf of 'Ron Benson' ronb9131@virginmedia.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> [b]Sent:[/b] 12 January 2018 11:17 [b]To:[/b] mg-tabc@yahoogroups.com [b]Subject:[/b] [mg-tabc] Re: MG-TA, MG-TB tool trays Hi Jan,

Do you have any empty tool trays for sale. I have most of the tools, but no trays.

Regards,

Ron Benson

Posted: **Fri Jan 12, 2018 11:54 pm**

Liverpool motorworks in Pennsylvania

Jerry Labant

LMWJERRY@AOL.COM

He has two (2) different tool trays

One for Stamped -flat spanners/wrenches

And One for Shelley forged spanners

Tell him which you have.

My early 37 owners manual shows stamped spanners

But he thinks only late TA/TB used those and early TA

Used forged ones!? Jan

Sent from Mail for Windows 10

Posted: **Sat Jan 13, 2018 10:10 am**

Jerry LaBant has both tools and trays. Some years back, he made a mold for the trays from my pristine TB tool tray. He can be found at:

Liverpool Motor Works

Jerry LaBant

RD#1 Box 19B

Liverpool, PA 17045

717-444-7171

LMWJERRY@aol.com

www.liverpoolmotorworks.com

7PM-9PM Mon-Fri

10AM – 4PM Sat

Roger

[b]Roger G. Morse AIA[/b]

504 Snake Hill Road

Poestenkill, NY 12140

Mobile: (518) 461-7106