Page 1 of 1
I have a squeak
Posted: Tue Jul 23, 2002 7:03 pm
by rmeismer1@aol.com
I just started to hear a squeak,squeak,squeak a kind of high pitch sound. It
gets faster with more RPMs. I took the fan belt off to make sure it was not
a generator ,fan shaft bearing or belt. The only thing that I have changed
was the oil (Castrol 20w50). I was wondering if XPAG engines have any
problems with oil passage ways pluging up,to the upper end. Open for any
ideas. I thought that I would adjust the valves to see if that had any
effect.
Thanks
From M.G.( Meismer's Garage)
Rolland Meismer
Burlington,Iowa U.S.A.
1947 TC #3409--1951 TD #5522
[Non-text portions of this message have been removed]
Re: I have a squeak
Posted: Wed Jul 24, 2002 5:58 am
by Dean Jensen
Rolland
You might check for a bent push rod, all you need to do is rotate them
when they are not under tension. Cheers Dean
-----Original Message-----
From:
rmeismer1@aol.com [mailto:
rmeismer1@aol.com]
Sent: Tuesday, July 23, 2002 9:01 PM
To:
mg-tabc@yahoogroups.com
Subject: [mg-tabc] I have a squeak
I just started to hear a squeak,squeak,squeak a kind of high pitch
sound. It
gets faster with more RPMs. I took the fan belt off to make sure it was
not
a generator ,fan shaft bearing or belt. The only thing that I have
changed
was the oil (Castrol 20w50). I was wondering if XPAG engines have any
problems with oil passage ways pluging up,to the upper end. Open for
any
ideas. I thought that I would adjust the valves to see if that had any
effect.
Thanks
From M.G.( Meismer's Garage)
Rolland Meismer
Burlington,Iowa U.S.A.
1947 TC #3409--1951 TD #5522
[Non-text portions of this message have been removed]
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/