Page 1 of 1
Steering Set Up
Posted: Fri Jun 28, 2002 7:10 pm
by Harry Pyle
When all else fails..."read the manual".
The only way to assemble the steering link ends are as per the manual..see page 21 "Steering ball joints".
This gives the correct order of assembling balls, cups, springs and plugs. If they are not assembled correctly you can get a situation where the spring at one end is working in the wrong direction as the other. This can be dangerous if done incorrectly...as already noted by some members.
In all the miles I have done with TC2446 we have never had our balls pop out....nor have we worn them out. Proper set up..regular greasing and they will virtually last forever. (it is old technology..and the manual recommends fresh grease every 500 miles !!!)
Safety Fast....hope this helps.
Regards Harry Pyle
[Non-text portions of this message have been removed]
Re: Steering Set Up
Posted: Sat Jun 29, 2002 5:27 am
by Badger
----- Original Message -----
From: "Harry Pyle"
".................................. In all the miles I have done with TC2446
we have never had our balls pop out....nor have we worn them out. Proper set
up..regular greasing and they will virtually last forever.............."
This is very good news indeed! And very good advice as well. Thanks Harry,
for that.
Badger
Re: Steering Set Up
Posted: Mon Jul 01, 2002 5:14 am
by Jeff & Merryl Redman
G'day Badger..
Your reserved reply to Harry speaks volumes,
similarly, your restraint does you great credit sir!
I have had the very great pleasure of sharing the odd jar with Harry
and feel I know when this bloke is having a quiet lend of everyone.
Whether by sheer accident or (as I suspect) your superior intellect, I feel
you have also tuned into imagining Harry's pained expression as he described
the excruciating experienceof ' popping one's balls out'. However, his
claims of 'never wearing them out' I feel should be attributed to the
brashness usually associated with our fellow Aussies who live in the
frontier country of our great west.
Just keep 'em hitched up outa the dirt harry... hurts like hell otherwise!
'Reddo
(One of the wise men from the East!)(minus camel... but with TC)
----- Original Message -----
From: "BADGER" mrbadger@cox.net>
To: "MG-TABC" mg-tabc@yahoogroups.com>
Sent: Saturday, June 29, 2002 10:07 PM
Subject: Re: [mg-tabc] Steering Set Up
> ----- Original Message -----
> From: "Harry Pyle"
> ".................................. In all the miles I have done with
TC2446
> we have never had our balls pop out....nor have we worn them out. Proper
set
> up..regular greasing and they will virtually last forever.............."
>
> This is very good news indeed! And very good advice as well. Thanks
Harry,
> for that.
> Badger
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>