Page 1 of 1
K&N Racing -Quality Lifetime Air Filter for the TC
Posted: Mon Jun 03, 2002 11:20 am
by LuckyFloridaLin@aol.com
Dear Lads and Lassies; Some of us have the coffee can air filter with a
removable top. After much research I found a perfect filter insert suitable
for installation. It is High-Flow filter used in racing and off road. Filter
number is: RC-4340
Caveat: Check all dimensions in case of variability of ye olde coffe cans.
The air filter is domed shaped,with a flat topped metal cap and the top is
just below the rectangular air openings. For Simulation of Originality, the
steel wool can be inserted on the top.
The filter's rubber bottom fits perfectly over the intake lip of the Carb
manifold and comes with a clamp for filter security I did have to wait awhile
for K&N to put this filter into production but I believe they are now
avalable. My thanks to K&N for putting this filter back into production.
Try to take advantage of this mavelous filter that is so perfect for insuring
the longevity of our XPAG engines
Tally Ho! Thom Collins
[Non-text portions of this message have been removed]
Re: K&N Racing -Quality Lifetime Air Filter for the TC
Posted: Tue Jun 04, 2002 12:35 pm
by Ray
The filters below described are available now online at
http://www.4filters.com/replacement_filters.htm . Cost is 39.90
Snail address is:FOX Performance, 21999 Van Buren St., Suite 6, Grand
Terrace, CA 92313 USA
Phone-909.824.8008
Best,
Ray
> Dear Lads and Lassies; Some of us have the coffee can air filter with a
> removable top. After much research I found a perfect filter insert
suitable
> for installation. It is High-Flow filter used in racing and off road.
Filter
> number is: RC-4340
>
> Caveat: Check all dimensions in case of variability of ye olde coffe
cans.
> The air filter is domed shaped,with a flat topped metal cap and the top is
> just below the rectangular air openings. For Simulation of Originality,
the
> steel wool can be inserted on the top.
> The filter's rubber bottom fits perfectly over the intake lip of the
Carb
> manifold and comes with a clamp for filter security I did have to wait
awhile
> for K&N to put this filter into production but I believe they are now
> avalable. My thanks to K&N for putting this filter back into production.
> Try to take advantage of this mavelous filter that is so perfect for
insuring
> the longevity of our XPAG engines
> Tally Ho! Thom Collins