Wilsons Sandbox

Posted: **Mon Jun 03, 2002 9:15 am**

I am fitting four new suspension springs, do I interleave, with what, ,just grease, fit gaiters, grease and tape, or just paint?...thanks in advance...Bob [Non-text portions of this message have been removed]

Posted: **Tue Jun 04, 2002 1:53 am**

On assembly A good graphite grease - then in future just apply oil Regards Clive ====================================

----- Original Message ----- From: "R.F.Butson" robbut@onetel.net.uk> To: "MG TABC" mg-tabc@yahoogroups.com> Sent: Monday, June 03, 2002 4:46 PM Subject: [mg-tabc] Springs > I am fitting four new suspension springs, do I interleave, with what, ,just grease, fit gaiters, grease and tape, or just paint?...thanks in advance...Bob > > > [Non-text portions of this message have been removed] > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >

Posted: **Mon Feb 03, 2003 12:24 pm**

Hello group, Does anyone know where I could have some road-spring leaves replaced? I seem to be two or three missing from various house moves. No one in this part of the world has the correct thickness/width steel. I know, I know; I should have left them clamped up! Regards to all, David Lodge.

Posted: **Tue Feb 04, 2003 3:52 am**

I do not know where you are but I have a few short ones Ross TC 4284

----- Original Message ----- Wrom: NHGSWZIDREX Sent: Tuesday, 4 February 2003 7:25 AM To: mg-t@autox.team.net Cc: T-ABCs_Forever Subject: [mg-tabc] Springs Hello group, Does anyone know where I could have some road-spring leaves replaced? I seem to be two or three missing from various house moves. No one in this part of the world has the correct thickness/width steel. I know, I know; I should have left them clamped up! Regards to all, David Lodge. Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com [Non-text portions of this message have been removed]

Posted: **Wed Feb 05, 2003 6:39 am**

David, I am in West Australia....where are you ? I may be able to help with the odd used leaf which you will then be able to get reset to match your others. Let me know if I can help. Regards Harry Pyle

----- Original Message ----- From: "David Lodge" lodge@shaw.ca> To: mg-t@autox.team.net> Cc: "T-ABCs_Forever" mg-tabc@yahoogroups.com> Sent: Tuesday, February 04, 2003 4:24 AM Subject: [mg-tabc] Springs > Hello group, > > Does anyone know where I could have some road-spring leaves replaced? I seem > to be two or three missing from various house moves. No one in this part of > the world has the correct thickness/width steel. > I know, I know; I should have left them clamped up! > > Regards to all, David Lodge. > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >

Posted: **Sun Dec 05, 2004 1:42 pm**

Dear enlightened ones' where do road springs usually break? I am checking my springs and would like to know where to look. thank you gene olson TC3353

Wilsons Sandbox

Springs

Springs

Re: Springs

Springs

Re: Springs

Re: Springs

springs