Wilsons Sandbox

> From: "R.F.Butson" robbut@onetel.net.uk> > Date: Sat, 1 Jun 2002 10:23:54 +0100 > To: "MG TABC" mg-tabc@yahoogroups.com> > Subject: [mg-tabc] BSF nuts and bolts > > The Moss list is fine, but no quantities or location...Bob > > > [Non-text portions of this message have been removed] > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >

> Bob > > Malcolm Green's book -T series restoration guide- has a schedule for B.S.F. > etc. bolts, this combined with that already on the TABC website for engine > bolts just about gives full coverage. > > Regards > > Tony TC9825 > > > From: "R.F.Butson" robbut@onetel.net.uk> > > Date: Sat, 1 Jun 2002 10:23:54 +0100 > > To: "MG TABC" mg-tabc@yahoogroups.com> > > Subject: [mg-tabc] BSF nuts and bolts > > > > The Moss list is fine, but no quantities or location...Bob > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

----- Original Message ----- From: "Terry & Lynda-May O'Brien" hamptons1@shaw.ca> To: "tonygoodall" tonygoodall@blueyonder.co.uk> Cc: "MG-TABC" mg-tabc@yahoogroups.com> Sent: Sunday, June 02, 2002 11:17 AM Subject: Re: [mg-tabc] BSF nuts and bolts > Tony: This must be in a later edition. I have the 1993 hard cover edition and > it has no such schedule. It would be usefull if it could be added to the > website. Terry TC8202 > > tonygoodall wrote: > > > Bob > > > > Malcolm Green's book -T series restoration guide- has a schedule for B.S.F. > > etc. bolts, this combined with that already on the TABC website for engine > > bolts just about gives full coverage. > > > > Regards > > > > Tony TC9825 > > > > > From: "R.F.Butson" robbut@onetel.net.uk> > > > Date: Sat, 1 Jun 2002 10:23:54 +0100 > > > To: "MG TABC" mg-tabc@yahoogroups.com> > > > Subject: [mg-tabc] BSF nuts and bolts > > > > > > The Moss list is fine, but no quantities or location...Bob > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > > > > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >

> From: Terry & Lynda-May O'Brien hamptons1@shaw.ca> > Reply-To: hamptons1@shaw.ca > Date: Sun, 02 Jun 2002 08:17:37 -0700 > To: tonygoodall tonygoodall@blueyonder.co.uk> > Cc: MG-TABC mg-tabc@yahoogroups.com> > Subject: Re: [mg-tabc] BSF nuts and bolts > > Tony: This must be in a later edition. I have the 1993 hard cover edition and > it has no such schedule. It would be usefull if it could be added to the > website. Terry TC8202 > >>> >

> Terry > > Unfortunately it would be a breach of copywrite to publish the schedule from > Malcolm Greens book. I suppose it could be re-drafted in some way, but that > entails quite a bit of work. > > Tony TC 9825 > > > From: Terry & Lynda-May O'Brien hamptons1@shaw.ca> > > Reply-To: hamptons1@shaw.ca > > Date: Sun, 02 Jun 2002 08:17:37 -0700 > > To: tonygoodall tonygoodall@blueyonder.co.uk> > > Cc: MG-TABC mg-tabc@yahoogroups.com> > > Subject: Re: [mg-tabc] BSF nuts and bolts > > > > Tony: This must be in a later edition. I have the 1993 hard cover edition and > > it has no such schedule. It would be usefull if it could be added to the > > website. Terry TC8202 > > > >>> > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

>From: "Roger Furneaux" Roger.46TC@virgin.net> >To: tonygoodall tonygoodall@blueyonder.co.uk> >Subject: Re: [mg-tabc] BSF nuts and bolts >Date: Sun, Jun 2, 2002, 11:24 pm > >A few years back on one of my visits to Malcolm, he showed me a schedule of >nuts & bolts & fixings, from the M.G. Car Co. It might have been loose-leaf >at one time, but Malcolm had bound it (he used to do book-binding as a sort >of hobby) so it could not be photocopied. > >The point is, if he has used some of this in later editions of his book, >then: > >1) those of us who bought the first edition were sold short, > >2) if M.G. put this out like a parts list (for the use of garages doing >repairs), who owns the copyright anyway??? > >I would like to volunteer Mike Card to go see Malcolm and ascertain the >position. > >ocTagonally > >TCRoger > >>Unfortunately it would be a breach of copywrite to publish the schedule from >>Malcolm Greens book. I suppose it could be re-drafted in some way, but that >>entails quite a bit of work. > >>> Tony: This must be in a later edition. I have the 1993 hard cover edition and >>> it has no such schedule. It would be usefull if it could be added to the

> From: "R. Zwart" zwart@earthlink.net> > Reply-To: zwart@earthlink.net > Date: Mon, 03 Jun 2002 13:04:49 -0700 > To: tonygoodall tonygoodall@blueyonder.co.uk> > Subject: Re: [mg-tabc] BSF nuts and bolts > > Maybe it's another edition or another Malcolm Green book?????? What page? > BOB >