bench seat

[cshiplee@141international.com]

I rebuilt my bench back with a new spring unit and leather from Moss.( the original was too far gone). I find it very "high" on the outside edges. When you sit in the car you almost want to slide toward the middle. I cant remember if this was the situation with the original set, although as it was so old it had very little springing left any way. Has anyone else experienced this? Charles IMPORTANT NOTICE: This message is intended for the use of the person(s) or organisation (the Intended Recipient) to whom it is addressed. It may contain information which is privileged and confidential within the meaning of applicable law. Accordingly dissemination, distribution, copying or other use of this message or any of its contents by any person other than the Intended Recipient may constitute a breach of civil or criminal law and is strictly prohibited. If you are not the Intended Recipient please contact the sender as soon as possible. All information or opinions expressed in this message and/or any attachments are those of the author and are not necessarily those of The Group. All reasonable precautions have been taken to ensure no viruses are present in this E-mail. As The Group accepts no responsibility for loss or damage arising from the use of this E-mail or attachments we recommend that you subject these to your virus checking procedures prior to use.

[Clive Sherriff]

Ive still got a very original one, the springs in excellent condition and there is no tendency to fall into the middle Regards Clive =====================================

----- Original Message ----- From: cshiplee@141international.com> To: mg-tabc@yahoogroups.com> Sent: Friday, May 31, 2002 10:38 AM Subject: [mg-tabc] bench seat > > I rebuilt my bench back with a new spring unit and leather from Moss.( the > original was too far gone). > I find it very "high" on the outside edges. When you sit in the car you > almost want to slide toward the middle. I cant remember if this was the > situation with the original set, although as it was so old it had very > little springing left any way. > Has anyone else experienced this? > > > Charles > > IMPORTANT NOTICE: > This message is intended for the use of the person(s) or organisation (the > Intended Recipient) to whom it is addressed. It may contain information > which is privileged and confidential within the meaning of applicable law. > Accordingly dissemination, distribution, copying or other use of this > message or any of its contents by any person other than the Intended > Recipient may constitute a breach of civil or criminal law and is strictly > prohibited. If you are not the Intended Recipient please contact the sender > as soon as possible. All information or opinions expressed in this message > and/or any attachments are those of the author and are not necessarily > those of The Group. All reasonable precautions have been taken to ensure no > viruses are present in this E-mail. As The Group accepts no responsibility > for loss or damage arising from the use of this E-mail or attachments we > recommend that you subject these to your virus checking procedures prior to > use. > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >