Re: Digest Number 860
Posted: Thu May 30, 2002 3:33 pm
Hi Tom,
Get some of Roger Furneaux' modified hub nuts and providing
your hub/halfshaft splines are OK should have no more bother. I bought some
from Roger at Rebuild 02 top notch engineering!
On previous thread re brake problem could be the old oval drums malady.
Finally have just refitted my "frighten old ladies and small children"
exhaust system to go with Geo. Edney modified/ unleaded cylinder head.
Sounds like several 500cc JAP speedway bikes! Very incorrect.
Regards "Rocket" Ron Benson TB
18:00:13 EDT
discussion> From: Tombutlercpa@cs.com > Subject: Rear wheel oil > > My TC is continuously leaking oil from the spokes. There was some
> recently about tapered axles et. al. Help. > > > [Non-text portions of this message have been removed] > > > > ________________________________________________________________________ > ________________________________________________________________________ > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > >