Seat and dash ??

[rmeismer1@aol.com]

I am putting the seats in my 1947 TC and it looks like the back of seat sets too high (about 2 in. above the body work.) I have looked at a lot of pics and they seem to very a lot ,can someone tell me what is right? Also I am ready to put the center dash panel in and ordered the small bolts that hold it in place from Moss thay came chromed, Sherrell shows that they should be black what is right? It will have a black panel on wood dash. From M.G.( Meismer's Garage) Rolland Meismer Burlington,Iowa U.S.A. 1946 TC #3409--1951 TD #5522 [Non-text portions of this message have been removed]

[Dean Jensen]

Rolland The bolt heads should be black, there are two different seat backs, on my TC with the seat leaned back as far as possible it is about 1 1/4 to 1 1/2 higher than the body, on my TD it sets lower than the body, all the way back -----Original Message----- From: rmeismer1@aol.com [mailto:rmeismer1@aol.com] Sent: Sunday, May 19, 2002 6:35 PM To: mg-tabc@yahoogroups.com Subject: [mg-tabc] Seat and dash ?? I am putting the seats in my 1947 TC and it looks like the back of seat sets too high (about 2 in. above the body work.) I have looked at a lot of pics and they seem to very a lot ,can someone tell me what is right? Also I am ready to put the center dash panel in and ordered the small bolts that hold it in place from Moss thay came chromed, Sherrell shows that they should be black what is right? It will have a black panel on wood dash.

[kwcp]

Rolland: You can get the black bolts for the the instrument panel from Craig Seabrook. Look in the list of parts suppliers & restorers for his address. Craig is a list member. Ken TC 4147 rmeismer1@aol.com wrote:

> > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

[webmaster@consultantbob.com]

Rolland: I got my new set of black instrument panel bolts from Craig Seabrook. VERY pleased with them!! His contact info is as follows: CRAIG SEABROOK The Whitworth Shop 14444 WATT ROAD NOVELTY, OHIO 44072 USA Tel. 440-338-5950 E-mail: seabrook@en.com Cheers. Bob Johnson -- '46 TC 1450 [Non-text portions of this message have been removed]

[seabrook@en.com]

Rolland, Bob, & Group, It is true, I can supply a proper painted set of instrument panel bolts. Craig Seabrook Whitworth Shop 14444 Watt Road Novelty, Ohio 44072 440-338-5950 TC/0911 webmaster@consultantbob.com wrote:

> > Rolland: > > I got my new set of black instrument panel bolts from Craig Seabrook. VERY pleased with them!! > > His contact info is as follows: > > CRAIG SEABROOK > The Whitworth Shop > 14444 WATT ROAD > NOVELTY, OHIO 44072 USA > Tel. 440-338-5950 > E-mail: seabrook@en.com > > Cheers. > Bob Johnson -- '46 TC 1450 > > [Non-text portions of this message have been removed] > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

[R. Zwart]

Try a black permanent marker pen on the Chrome heads as it will work and save money and time. Or you can paint. BOB kwcp wrote:

> Rolland: > You can get the black bolts for the the instrument panel from Craig Seabrook. > Look in the list of parts suppliers & restorers for his address. Craig is a list > member. > Ken TC 4147 > > rmeismer1@aol.com wrote: > > > > > > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

[seabrook@en.com]

Bob & Group, In my opinion, painting the instrument panel bolts is the only way to go. We can supply a proper set painted black for $8. What a deal. Craig Seabrook Whitworth Shop R. Zwart wrote:

> > Try a black permanent marker pen on the Chrome heads as it will work and save money > and time. Or you can paint. > BOB >