Page 1 of 1
TA Chassis
Posted: Fri May 17, 2002 7:57 am
by R.F.Butson
The chassis for my TA (early RHD ), has a missing bracket. The bracket is (was ) welded to the inside face of the offsde chassis member near the top, 35.5 ins. measured horizontally from centre of the front cross-tube. What remains is a semi circular piece about 1.0 in. dia. Can anyone identify this and hopefully send me a drawing? Many thanks......Bob
[Non-text portions of this message have been removed]
Re: TA Chassis
Posted: Mon May 20, 2002 12:52 pm
by nakleyn@iafrica.com
Bob
I do not have a drawing but my TA has the brake 3 way fitting mounted to a
bracket welded to the chassis approx. 35.5 ins from front member.
Trust this helps...Nico
TA chassis
Posted: Fri May 22, 2009 11:42 pm
by rob
Looking for a TA chassis (virtually any condition) for a project some friends are planning. If you can help, please contact me off list.
Thanks, Robert
Robert Ford
TC 9657 Santa Barbara
Re: TA chassis
Posted: Sat May 23, 2009 8:37 am
by Diecuts@aol.com
Hi Rob,
I have a friend with a complete low milage?rust free rolling TD chassis less engine and gearbox that is looking for a home.
Not sure what he is asking for it, but it is not much.? It is located in the metropolitan Detroit area.
Contact off list if you (or anyone else) is interested.
Cheers,? Lee Jacobsen, Dearborn, MI????TC0780?
-----Original Message-----
From: Rob robfz@hotmail.com>
To:
mg-tabc@yahoogroups.com
Sent: Sat, 23 May 2009 2:42 am
Subject: [mg-tabc] TA chassis
Looking for a TA chassis (virtually any condition) for a project some friends
are planning. If you can help, please contact me off list.
Thanks, Robert
Robert Ford
TC 9657 Santa Barbara
------------------------------------
Yahoo! Groups Links
[Non-text portions of this message have been removed]