Wilsons Sandbox

On Tue, 7 May 2002, SBS wrote to mg-tabc@yahoogroups.com and somexuk:

> can any one tell me the front axle king pin angles with > respect to the spring pads. > ie castor and camber angles

I assume you mean with the axle off the springs, resting on its spring pads. If so, the caster angle should be 3 degrees. The camber measured at the wheel or hub is 3 degrees positive. If the hubs are off, then measure the king pin inclination (tilt toward center of axle) which should be 7.5 degrees. If you have Mike Sherrell's book "TCs Forever", there is an excellent explanation with diagrams on page 111. -- Chip Old 1948 M.G. TC TC6710 XPAG7430 NEMGTR #2271 Cub Hill, Maryland 1962 Triumph TR4 CT3154LO CT3479E fold@bcpl.net