Bleeder wrench size
Posted: Sun Apr 21, 2002 3:19 pm
Can someone tell me the wrench size for the rear bleed screw on the TA/TC?
Tnx
Terry
Wilsons Sandbox
http://www.frenchandlogan.com/phpBB3/
http://www.frenchandlogan.com/phpBB3/viewtopic.php?f=53&t=276692
----- Original Message ----- From: taterry@aol.com> To: mg-tabc@yahoogroups.com> Sent: Monday, April 22, 2002 8:19 AM Subject: [mg-tabc] Bleeder wrench size > Can someone tell me the wrench size for the rear bleed screw on the TA/TC? > Tnx > Terry > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >
----- Original Message ----- From: "Jeff & Merryl Redman" redcigar@ozemail.com.au> To: taterry@aol.com> Cc: mg-tabc@yahoogroups.com> Sent: Monday, April 22, 2002 6:15 AM Subject: Re: [mg-tabc] Bleeder wrench size > Whatsa 'WRENCH??' > > Speak English man! > > Regards > Jeff TA2828 > ----- Original Message ----- > From: taterry@aol.com> > To: mg-tabc@yahoogroups.com> > Sent: Monday, April 22, 2002 8:19 AM > Subject: [mg-tabc] Bleeder wrench size > > > > Can someone tell me the wrench size for the rear bleed screw on the TA/TC? > > Tnx > > Terry > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > >
----- Original Message ----- From: "Sam Suklis" ssp15@attbi.com> To: taterry@aol.com>; "Jeff & Merryl Redman" redcigar@ozemail.com.au> Cc: mg-tabc@yahoogroups.com> Sent: Monday, April 22, 2002 5:14 PM Subject: Re: [mg-tabc] Bleeder wrench size > Not everyone speaks Spanner. > SS > ----- Original Message ----- > From: "Jeff & Merryl Redman" redcigar@ozemail.com.au> > To: taterry@aol.com> > Cc: mg-tabc@yahoogroups.com> > Sent: Monday, April 22, 2002 6:15 AM > Subject: Re: [mg-tabc] Bleeder wrench size > > > > Whatsa 'WRENCH??' > > > > Speak English man! > > > > Regards > > Jeff TA2828 > > ----- Original Message ----- > > From: taterry@aol.com> > > To: mg-tabc@yahoogroups.com> > > Sent: Monday, April 22, 2002 8:19 AM > > Subject: [mg-tabc] Bleeder wrench size > > > > > > > Can someone tell me the wrench size for the rear bleed screw on the > TA/TC? > > > Tnx > > > Terry > > > > > > > > > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > > > > > > > > > > > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >
----- Original Message ----- From: "Jeff & Merryl Redman" redcigar@ozemail.com.au> To: taterry@aol.com> Cc: mg-tabc@yahoogroups.com> Sent: Monday, April 22, 2002 8:15 AM Subject: Re: [mg-tabc] Bleeder wrench size > Whatsa 'WRENCH??' > > Speak English man! > > Regards > Jeff TA2828 > ----- Original Message ----- > From: taterry@aol.com> > To: mg-tabc@yahoogroups.com> > Sent: Monday, April 22, 2002 8:19 AM > Subject: [mg-tabc] Bleeder wrench size > > > > Can someone tell me the wrench size for the rear bleed screw on the TA/TC? > > Tnx > > Terry > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >
> Can someone tell me the wrench size for the rear bleed screw on the TA/TC? > Tnx > Terry > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Mr. Badger, That's Mole grips, if you please, sir! David Lodge> A number 3 whitworth Visegrip - oops sorry, I mean MOLE WRENCH always worked > for me. > Badger > > > ----- Original Message ----- > From: "Sam Suklis" ssp15@attbi.com> > To: taterry@aol.com>; "Jeff & Merryl Redman" redcigar@ozemail.com.au> > Cc: mg-tabc@yahoogroups.com> > Sent: Monday, April 22, 2002 5:14 PM > Subject: Re: [mg-tabc] Bleeder wrench size > > >> Not everyone speaks Spanner. >> SS >> ----- Original Message ----- >> From: "Jeff & Merryl Redman" redcigar@ozemail.com.au> >> To: taterry@aol.com> >> Cc: mg-tabc@yahoogroups.com> >> Sent: Monday, April 22, 2002 6:15 AM >> Subject: Re: [mg-tabc] Bleeder wrench size >> >> >>> Whatsa 'WRENCH??' >>> >>> Speak English man! >>> >>> Regards >>> Jeff TA2828 >>> ----- Original Message ----- >>> From: taterry@aol.com> >>> To: mg-tabc@yahoogroups.com> >>> Sent: Monday, April 22, 2002 8:19 AM >>> Subject: [mg-tabc] Bleeder wrench size >>> >>> >>>> Can someone tell me the wrench size for the rear bleed screw on the >> TA/TC? >>>> Tnx >>>> Terry >>>> >>>> >>>> >>>> Your use of Yahoo! Groups is subject to >> http://docs.yahoo.com/info/terms/ >>>> >>>> >>> >>> >>> >>> >>> >>> Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ >>> >>> >>> >> >> >> >> >> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ >> >> > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >