Page 1 of 1
Virus Warning Thank-you
Posted: Wed Apr 17, 2002 10:14 pm
by tamata i valu
Good-day all :
I also have had strange messages and thanks to those early warnings I did
not open any . The ones # 3 and # 4 listed by Mr. Hara were two that I
received today
as well !
Thanks again to the ever vigilant members of the " Group " , that have
brought these menaces to light !
I should now like to make an enquiry .
On Page # 77 of the Moss Catalogue # MGT 0204 , listed as item # 7 , Part #
190-295 , Release Bearing , Roller Bearing Type. I would like to know ,
from the membership , as to what , if any , the advantages are of employing
this part rather than the conventional one , Part # 190-290 ? My mechanical
skills are passable , but my engineering savy is sadly lacking .
Cheers to all ; respectfully : Jack Emdall , TC # 6768
Re: Virus Warning Thank-you
Posted: Thu Apr 18, 2002 1:11 am
by i.thomson@talk21.com
FWIW. Although my inbuilt conventional wisdom tends to feel that a roller release bearing would be better than the carbon one (less friction and does not break up) experience on other sites (esp the V8 site which I frequent) says otherwise. Apparently the roller bearing wears badly and thus becomes noisy, whereas the carbon bearing has to break up completely before it does this.
Ian Thomson.
>On Page # 77 of the Moss Catalogue # MGT 0204 , listed as item # 7 , Part #
>190-295 , Release Bearing , Roller Bearing Type. I would like to know ,
>from the membership , as to what , if any , the advantages are of employing
>this part rather than the conventional one , Part # 190-290 ? My mechanical
>skills are passable , but my engineering savy is sadly lacking .
>
>Cheers to all ; respectfully : Jack Emdall , TC # 6768
>
>
>
>
>Your use of Yahoo! Groups is subject to
http://talk21.btopenworld.com/redirect.html?http://talk21.btopenworld.com/redirect.html?http://docs.yahoo.com/info/terms/''>
[url=http://talk21.btopenworld.com/redirect.html?http://docs.yahoo.com/info/terms/'http://talk21.btopenworld.com/redirect.html?http://docs.yahoo.com/info/terms/'>>http://talk21.btopenworld.com/redirect.html?http://docs.yahoo.com/info/terms/'>
[url=http://docs.yahoo.com/info/terms/http://docs.yahoo.com/info/terms/>
--------------------
talk21 your FREE portable and private address on the net at
http://www.talk21.com
Re: Virus Warning Thank-you
Posted: Thu Apr 18, 2002 7:23 am
by Skip Kelsey
Jack:
DONT use the roller bearing Throwout.
Skip...................................
At 10:08 PM 4/17/02 -0700, tamata i valu wrote:
>Good-day all :
>
>I also have had strange messages and thanks to those early warnings I did
>not open any . The ones # 3 and # 4 listed by Mr. Hara were two that I
>received today
>as well !
>
>Thanks again to the ever vigilant members of the " Group " , that have
>brought these menaces to light !
>
>I should now like to make an enquiry .
>
>On Page # 77 of the Moss Catalogue # MGT 0204 , listed as item # 7 , Part #
>190-295 , Release Bearing , Roller Bearing Type. I would like to know ,
>from the membership , as to what , if any , the advantages are of employing
>this part rather than the conventional one , Part # 190-290 ? My mechanical
>skills are passable , but my engineering savy is sadly lacking .
>
>Cheers to all ; respectfully : Jack Emdall , TC # 6768
>
>
>
>
>Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/