Page 1 of 1
Special Tuning Booklet
Posted: Thu Apr 11, 2002 9:58 pm
by exlna
T-Typers:
I have started uploading to the files section of the MG-TABC web site
images of the MG Midget TC special tuning booklet. This is for the
XPAG engine. It is found at:
http://groups.yahoo.com/group/mg-tabc/f ... l%20Tuning%
20Booklet/
If you don't think it is of interest, let me know know and I will
remove it.
Blake
Re: Special Tuning Booklet
Posted: Fri Apr 12, 2002 12:56 am
by Forstner, Peter
RE: [mg-tabc] Special Tuning Booklet
Blake,
just for info:
http://groups.yahoo.com/..... is NOT the MG-TABC web site. These are two totally independent web sites on two independent web-servers.
Walter,
could you please copy all files from
http://groups.yahoo.com/group/mg-tabc/files/
to
http://www.mg-tabc.org/files/?
We should have ONE location for everything. Now we have to look on both locations to assemble all available knowledge.
Thanks
Peter Forstner - TC6325
peter@mg-tc.de
-----Original Message-----
From: exlna [
yd3@nvc.net]
Sent: Friday, 12 April, 2002 06:59
To:
mg-tabc@yahoogroups.com
Subject: [mg-tabc] Special Tuning Booklet
T-Typers:
I have started uploading to the files section of the MG-TABC web site
images of the MG Midget TC special tuning booklet. This is for the
XPAG engine. It is found at:
http://groups.yahoo.com/group/mg-tabc/files/Midget%20Special%20Tuning%
20Booklet/
If you don't think it is of interest, let me know know and I will
remove it.
Blake
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Re: Special Tuning Booklet
Posted: Fri Apr 12, 2002 7:53 am
by Orlando llenza
Help,
I'm putting toghether back my TC and currently working
on assembling the engine. The repair manual I have is
an original one and is not to clear as to the correct
torque the head studs go. Can any body assist me in
pounds or kilograms ? Thanks
Orlando
--- "Forstner, Peter" peter@mg-tc.de> wrote:
> Blake,
> just for info:
>
http://groups.yahoo.com/..... is NOT the MG-TABC web
> site. These are two
> totally independent web sites on two independent
> web-servers.
>
> Walter,
> could you please copy all files from
>
http://groups.yahoo.com/group/mg-tabc/files/
> to
http://www.mg-tabc.org/files/?
>
> We should have ONE location for everything. Now we
> have to look on both
> locations to assemble all available knowledge.
>
> Thanks
> Peter Forstner - TC6325
>
> mailto:
peter@mg-tc.de
>
> -----Original Message-----
> From: exlna [mailto:
yd3@nvc.net]
> Sent: Friday, 12 April, 2002 06:59
> To:
mg-tabc@yahoogroups.com
> Subject: [mg-tabc] Special Tuning Booklet
>
>
> T-Typers:
>
> I have started uploading to the files section of the
> MG-TABC web site
> images of the MG Midget TC special tuning booklet.
> This is for the
> XPAG engine. It is found at:
>
>
http://groups.yahoo.com/group/mg-tabc/f ... l%20Tuning%
> 20Booklet/
>
> If you don't think it is of interest, let me know
> know and I will
> remove it.
>
> Blake
>
>
>
>
> Your use of Yahoo! Groups is subject to
>
http://docs.yahoo.com/info/terms/
>
>
__________________________________________________
Do You Yahoo!?
Yahoo! Tax Center - online filing with TurboTax
http://taxes.yahoo.com/>
Re: Special Tuning Booklet
Posted: Fri Apr 12, 2002 9:06 am
by Skip Kelsey
Orlando:
If you torque to 42 Ft. Lbs. you will be just right.
Skip Kelsey...........................................
At 07:53 AM 4/12/02 -0700, Orlando llenza wrote:
>Help,
>
>I'm putting toghether back my TC and currently working
>on assembling the engine. The repair manual I have is
>an original one and is not to clear as to the correct
>torque the head studs go. Can any body assist me in
>pounds or kilograms ? Thanks
>
>Orlando
Re: Special Tuning Booklet
Posted: Fri Apr 12, 2002 9:30 am
by Leclerc, Lawrence
RE: [mg-tabc] Special Tuning Booklet
Peter and other TABC'ers: I totally and emphatically agree! We should have one location, if it can be accomplished without excessive demands on Walter. I will confess to being digitally challenged, but Yahoo is impossible. I have had three passwords in the last week, and have not yet been able to access the stuff I am looking for. Larry . Walter,
could you please copy all files from
http://groups.yahoo.com/group/mg-tabc/files/
to
http://www.mg-tabc.org/files/? We should have ONE location for everything. Now we have to look on both locations to assemble all available knowledge. Thanks
Peter Forstner - TC6325
peter@mg-tc.de -----Original Message
Your use of Yahoo! Groups is subject to the
Yahoo! Terms of Service.
Re: Special Tuning Booklet
Posted: Fri Apr 12, 2002 9:39 am
by Orlando llenza
Thanks for the info.
Orlando
--- Skip Kelsey kelsey@shadetreemotors.com> wrote:
> Orlando:
>
> If you torque to 42 Ft. Lbs. you will be just right.
>
> Skip
> Kelsey...........................................
>
>
> At 07:53 AM 4/12/02 -0700, Orlando llenza wrote:
> >Help,
> >
> >I'm putting toghether back my TC and currently
> working
> >on assembling the engine. The repair manual I have
> is
> >an original one and is not to clear as to the
> correct
> >torque the head studs go. Can any body assist me in
> >pounds or kilograms ? Thanks
> >
> >Orlando
>
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
>
http://docs.yahoo.com/info/terms/
>
>
__________________________________________________
Do You Yahoo!?
Yahoo! Tax Center - online filing with TurboTax
http://taxes.yahoo.com/
Re: Special Tuning Booklet
Posted: Fri Apr 12, 2002 11:45 am
by Bullwinkle
All:
If all material for the MG-TABC group must pass through one individual,
it is not a group site. It is a private site in which the owner has
agreed, at his/her discretion, to post information which may be of use
to others. The Yahoo site is a group site because members may leave
files for others to look at. Consequently I have REMOVED all the
material I posted at Yahoo.
Auf Viedersehen und lebewohl
Blake J. Urban
Moderator, MGA twin cam BBS at Yahoo.
http://groups.yahoo.com/messages/mgatwincam
Re: Special Tuning Booklet
Posted: Sat Apr 13, 2002 2:12 pm
by Joe Gates
"Consequently I have REMOVED all the material I posted at Yahoo."
Am not sure I understand this thread. Is the information to be made
available, and if so, where? If not, why not?
Joe Gates
'49 TC 8675
'80 MGB