Page 1 of 1
tc spring camber
Posted: Wed Apr 03, 2002 8:06 am
by the_wizard_o_cheese
Having trouble finding the proper camber for front and rear springs for the
tc. I'm trying to get reworked my spare spring set.
Iwould appreciate any info.
tc49@aol.com
Re: tc spring camber
Posted: Wed Apr 03, 2002 8:25 am
by Chip Old
On Wed, 3 Apr 2002,
TC49@aol.com wrote:
> Having trouble finding the proper camber for front and rear springs for
> the tc. I'm trying to get reworked my spare spring set. Iwould
> appreciate any info.
tc49@aol.com
The specs are in Blower's book. If nobody else responds, I'll post them
this evening.
--
Chip Old 1948 M.G. TC TC6710 XPAG7430 NEMGTR #2271
Cub Hill, Maryland 1962 Triumph TR4 CT3154LO CT3479E
fold@bcpl.net
Re: tc spring camber
Posted: Wed Apr 03, 2002 10:21 am
by CFritz7001@aol.com
According to the W.E. Blower book (The MG Manual -- 3rd Edition, 1953):
TC front springs have 1.85 in. camber (flat at 500 to 520 lbs.)
TC rear springs have 1.687 in. camber ( flat at 385 lbs.)
Regards,
Carl Fritz
TC # 6756 (Betsy)
VA # 2009 S (Abigail)
Gainesville, Florida
Re: tc spring camber
Posted: Wed Apr 03, 2002 11:04 am
by Frank O_ The Mountain
In a message dated 4/3/02 08:08:39 Pacific Standard Time,
TC49@aol.com writes:
>
This info is in the back of the Blowers Manual......
Terry