Page 1 of 1
Ignition / Lighting switch / EXU
Posted: Thu Mar 28, 2002 2:07 am
by George Arber
The wiring diagrams that I have show four connections marked :- A , IG , H
and T . However , on wiring up the ignition / lighting switch on our EXU I
note that it has an additional fifth terminal marked ' L ' . Maybe I am
missing the obvious but I cannot find any other wire to take from or to this
' L ' terminal. Normally a terminal marked ' L' would denote a ' Live '
terminal.
Any ideas ?
George TC 7548 EXU
Re: Ignition / Lighting switch / EXU
Posted: Thu Mar 28, 2002 6:28 am
by seabrook@en.com
George & Group,
The "L" terminal is not used on the PLC ignition-headlamp switch. I do
not think that it stands for "Live" either. It is just there.
Craig Seabrook
Whitworth Shop
TC/0911
George Arber wrote:
>
> The wiring diagrams that I have show four connections marked :- A , IG , H
> and T . However , on wiring up the ignition / lighting switch on our EXU I
> note that it has an additional fifth terminal marked ' L ' . Maybe I am
> missing the obvious but I cannot find any other wire to take from or to this
> ' L ' terminal. Normally a terminal marked ' L' would denote a ' Live '
> terminal.
>
> Any ideas ?
>
> George TC 7548 EXU
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/