Wilsons Sandbox

Rolland

Mine measures at least , maybe a little more, also the spare tire looks like it sets at about 75 degrees on my car. This is all taken in place , on the car, so it is hard to get a real accurate figure. The rubber on mine is not the original, and as I remember it the original was a little thinner, and I know it was softer, because of age? I am not sure. Also, on my car, someone had not been able to undo the nuts at the bottom, and they had cut the threads (straps) off with a hack saw. I straightened the thread and made up an extension, never notice it where it is located.

Did you get my email from a week ago asking about paint?

Cheers Dean

-----Original Message----- [b]From:[/b] rmeismer1@aol.com [mailto:rmeismer1@aol.com] [b]Sent:[/b] Friday, March 22, 2002 9:07 PM [b]To:[/b] mg-tabc@yahoogroups.com [b]Subject:[/b] [mg-tabc] More gas tank

Can anyone say what the thickness of the rubber that goes between the gas tank and the body. Mine looks to be between 1/2" and 3/8" and my straps were a little short. From M.G.( Meismer's Garage) Rolland Meismer Burlington,Iowa U.S.A. 1946 TC #3409--1951 TD #5522 Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.