Wilsons Sandbox

>From: Skip Kelsey kelsey@shadetreemotors.com> >To: Crowsail@aol.com, mg-tabc@yahoogroups.com >Subject: Re: [mg-tabc] Temperature Guage >Date: Tue, 19 Mar 2002 07:21:33 -0800 > >Pat: > >Actually the "capillary tube" is charged with ether. It should be done by >an expert on repairing instruments, such as Mo-Ma Mfg. in Aluquerque,NM. >That way it can be calibrated correctly. > >Skip Kelsey....................................... > > >At 08:38 PM 3/18/02 -0500, Crowsail@aol.com wrote: > >Greetings: > >I have a friend working on a TD who wondered if anyone could help him >out. > >He said: "My temperature guage tube is broken off. There should be >alcohol > >in this tube before I solder it back together, but I don't know how much > >to put in it." > > > > > > > >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >

>Hey Skip: > >I gotta couple or three (not all MG) that need fixin'. Do you have a >contact for "Mo-Ma Mfg."? > >Don >TC 7993 > > > >>From: Skip Kelsey kelsey@shadetreemotors.com> >>To: Crowsail@aol.com, mg-tabc@yahoogroups.com >>Subject: Re: [mg-tabc] Temperature Guage >>Date: Tue, 19 Mar 2002 07:21:33 -0800 >> >>Pat: >> >>Actually the "capillary tube" is charged with ether. It should be done by >>an expert on repairing instruments, such as Mo-Ma Mfg. in Aluquerque,NM. >>That way it can be calibrated correctly. >> >>Skip Kelsey....................................... >> >> >>At 08:38 PM 3/18/02 -0500, Crowsail@aol.com wrote: >> >Greetings: >> >I have a friend working on a TD who wondered if anyone could help him out. >> >He said: "My temperature guage tube is broken off. There should be alcohol >> >in this tube before I solder it back together, but I don't know how much >> >to put in it." >> >> >> >> >> >> >> >>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ >> > > > > >_________________________________________________________________ >Send and receive Hotmail on your mobile device: http://mobile.msn.com

>From: Skip Kelsey kelsey@shadetreemotors.com> >To: "Donald Wilkinson" digitaldon@hotmail.com>, Crowsail@aol.com, >mg-tabc@yahoogroups.com >Subject: Re: [mg-tabc] Temperature Guage/others >Date: Tue, 19 Mar 2002 11:40:11 -0800 > >Don: > >Mo-Ma Mfg. >(Margaret Lucas) >1321 Second St. >Albuquerque, NM 87102 >(505) 766-6661 >(505) 766-5419 (fax) > > >Skip................................................... > > >At 04:59 PM 3/19/02 +0000, Donald Wilkinson wrote: >>Hey Skip: >> >>I gotta couple or three (not all MG) that need fixin'. Do you have a >>contact for "Mo-Ma Mfg."? >> >>Don >>TC 7993 >> >> >> >>>From: Skip Kelsey kelsey@shadetreemotors.com> >>>To: Crowsail@aol.com, mg-tabc@yahoogroups.com >>>Subject: Re: [mg-tabc] Temperature Guage >>>Date: Tue, 19 Mar 2002 07:21:33 -0800 >>> >>>Pat: >>> >>>Actually the "capillary tube" is charged with ether. It should be done by >>>an expert on repairing instruments, such as Mo-Ma Mfg. in Aluquerque,NM. >>>That way it can be calibrated correctly. >>> >>>Skip Kelsey....................................... >>> >>> >>>At 08:38 PM 3/18/02 -0500, Crowsail@aol.com wrote: >>> >Greetings: >>> >I have a friend working on a TD who wondered if anyone could help him >>>out. >>> >He said: "My temperature guage tube is broken off. There should be >>>alcohol >>> >in this tube before I solder it back together, but I don't know how >>>much >>> >to put in it." >>> >>> >>> >>> >>> >>> >>> >>>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ >>> >> >> >> >> >>_________________________________________________________________ >>Send and receive Hotmail on your mobile device: http://mobile.msn.com > > > >