Scuttle holes
Posted: Tue Mar 12, 2002 10:33 am
In looking at the recent attached drawing of the TC bulkhead I came
up with three questions.
1. There is a hole next to the Oil Gauge Line Fitting hole and above
the Large Clip for Wiring Conduit hole that is not marked. What is
that for? I have the hole but nothing in it.
2. My carpets are attached to the bulkhead via "Lift-A-Dots". The
drawing does not show holes for the posts. Were the carpets attached
to the bulkhead or did some previous owner do this on my TC?
3. I have the four bolt holes for the steering excluder retaining
plate but mine are spaced more evenly around the main column hole.
One is actually in the seam where the bulkhead and the footplate
overlap. Is the drawing not accurate?
David Edgar, TC 5108
El Cajon, California