Page 1 of 1
Tapered Roller Bearing Source
Posted: Tue Feb 26, 2002 7:26 pm
by Kenneth Enborg
Please forgive me from intruding on the steering box debate. I am doing the
front axle conversion on my '36 TA from ball to tapered roller bearings. My
local NAPA auto parts store ( Michigan) had one of the bearings
(Timken#07097) and the races (Timken# 07204) at quite reasonable prices but
did not have the other bearing (Timken# 07079).
Do any of you know a US source?
Ken Enborg
Re: Tapered Roller Bearing Source
Posted: Tue Feb 26, 2002 7:37 pm
by Robert Grunau
Hi Ken,
He should be able to order it. Or go to a bearing supplier directly. You can
also use SKF or FAG 30205 inner brg ( 25 mm bore ) and 30304 ( 20 mm bore )
outer brg. SKF and FAG supply cup and cone as a set.
Regards, Bob Grunau
-----Original Message-----
From: Kenneth Enborg [mailto:
kenborg244264MI@comcast.net]
Sent: Tuesday, February 26, 2002 8:28 PM
To:
mg-tabc@yahoogroups.com
Subject: [mg-tabc] Tapered Roller Bearing Source
Please forgive me from intruding on the steering box debate. I am doing the
front axle conversion on my '36 TA from ball to tapered roller bearings. My
local NAPA auto parts store ( Michigan) had one of the bearings
(Timken#07097) and the races (Timken# 07204) at quite reasonable prices but
did not have the other bearing (Timken# 07079).
Do any of you know a US source?
Ken Enborg
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (
http://www.grisoft.com).
Version: 6.0.325 / Virus Database: 182 - Release Date: 2/19/02
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (
http://www.grisoft.com).
Version: 6.0.325 / Virus Database: 182 - Release Date: 2/19/02
Re: Tapered Roller Bearing Source
Posted: Wed Feb 27, 2002 12:23 pm
by Roger Furneaux
Ken - if you have any trouble getting this American invention in America, I
will happily supply from sleepy little Olde England. Always have a few in
stock. PLS let me know how much you have to pay over the counter, I might be
able to better it (inc. post)
I am also going to make a small batch of longer spacers for the taper
set-up.
ocTagonally
TCRoger
>He should be able to order it. Or go to a bearing supplier directly. You can
>also use SKF or FAG 30205 inner brg ( 25 mm bore ) and 30304 ( 20 mm bore )
>outer brg. SKF and FAG supply cup and cone as a set.
>Regards, Bob Grunau
>Please forgive me from intruding on the steering box debate. I am doing the
>front axle conversion on my '36 TA from ball to tapered roller bearings. My
>local NAPA auto parts store ( Michigan) had one of the bearings
>(Timken#07097) and the races (Timken# 07204) at quite reasonable prices but
>did not have the other bearing (Timken# 07079).
>Do any of you know a US source?
>Ken Enborg
>
>
>
>
>
>Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
>---
>Incoming mail is certified Virus Free.
>Checked by AVG anti-virus system (
http://www.grisoft.com).
>Version: 6.0.325 / Virus Database: 182 - Release Date: 2/19/02
>
>---
>Outgoing mail is certified Virus Free.
>Checked by AVG anti-virus system (
http://www.grisoft.com).
>Version: 6.0.325 / Virus Database: 182 - Release Date: 2/19/02
>
>
>
>
>
>Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>