Page 1 of 1
TB Seat Back Brackets
Posted: Mon Feb 04, 2002 9:44 pm
by Viv James TraX Interconnect (Pty.) Ltd
We need some advice from TB experts:-
My friend Feliciano who is getting on well with his TB needs to know
the layout of his seat-back adjusting system.
On the TC, the 2 brackets are riveted onto the wheel arches.
On the PA, they are screwed onto the body tub sides.
What is the arrangement on the TB?
VivJ
Re: TB Seat Back Brackets
Posted: Tue Feb 05, 2002 12:50 pm
by John G. Bulcken IV
Viv,
The TA and TB have the same set up. It is a bit different than the TC as
it mounts to the side of the wheel well on each side and not the top. NTG
and Naylor have the correct adjusters if these are missing, although I can
not confirm the quality as I was lucky enough to have my originals. Hope
this helps.
Cheers,
John
TB#0398
----- Original Message -----
From: "Viv James TraX Interconnect (Pty.) Ltd" viv@trax.co.za>
To: mg-tabc@yahoogroups.com>
Sent: Tuesday, February 05, 2002 12:45 AM
Subject: [mg-tabc] TB Seat Back Brackets
> We need some advice from TB experts:-
> My friend Feliciano who is getting on well with his TB needs to know
> the layout of his seat-back adjusting system.
> On the TC, the 2 brackets are riveted onto the wheel arches.
> On the PA, they are screwed onto the body tub sides.
> What is the arrangement on the TB?
>
> VivJ
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>