Page 1 of 1
MGTC Tripods Headlights
Posted: Sun Dec 30, 2001 3:45 pm
by Ron J. Zeraldo
The headlights on my TC have been replaced with the Jaguar style, Tripod, clear flat glass style light units...the chrome reflective backing of the lamp is some what tarnished, is there any way of opening the sealed lamp to inorder to clean, rechrome this piece? I am also interested in purchasing new units like these. I realize that they are not original but I certainly like the look. Any help would be appreciated!!
Regards,
Ron j. Zeraldo
Re: MGTC Tripods Headlights
Posted: Sun Dec 30, 2001 7:12 pm
by LuckyFloridaLin@aol.com
Dear Ron; I think we have the same Lucas 770 Trident lights. Will blind the
heck out of oncoming cars if you don't have them properly adjusted. There is
a chap down here in Sarasota who re- manufactured these marvelous lights and
does have them available. They are most expensive,In the hundreds. Also has
retrofit Halogen bulbs. These headlamps are 8 inches wide and I protect them
with with pad covers When I find out the price of the headlamps you will keel
over. So treat them like gold.I bought the pad covers from a Ford Model A
parts supplier, when I couldn't find stone guards after a year and a half of
searching. Badger I believe. had a set on his recently sold TC. If this is
what you thinkyou have, let me know, and I will get the mfg 's Tel number for
you. Tally Ho! Thom Collins
Re: MGTC Tripods Headlights
Posted: Sun Dec 30, 2001 10:45 pm
by Diecuts@aol.com
Hi Ron,
Nice-looking 7" new tripods with flat clear glass and halogen bulbs are
readily available. They look identical to the 7.70" units but are much less
in price. (around $150 per pair) . Similar units are found on Jaguar 120s
and Mk VIIs. I have an extra pair new in the box if interested that I was
going to put on the TC but am installing cats eye lenses instead. I am
also looking for a pair of 7.70" tripods with flat lenses to restore for my
120. The 7" tripods would work but the correct size for 120s is 7.70" and
that's what fits and look the best for a 120 anyway!. Perhaps a trade is
possible if yours are 7.70".
Cheers and Happy New Year.
Lee Jacobsen, Dearborn, MI
Re: MGTC Tripods Headlights
Posted: Mon Dec 31, 2001 6:35 am
by joecurto@aol.com
Ron the way you remove the glass is by breaking it ( brutal ) you then have the new glass made to size and open up the rolled edge of the reflector a little, repair the plating and silicon glass in place, Don Lawson of this list and NEMGTR tech editor just restored a set this way, maybe Don can jump in hare and share his experience
Joe Curto
Re: MGTC Tripods Headlights
Posted: Mon Dec 31, 2001 8:00 am
by Robert Grunau
You don t need to break the glass, carefully pry open the crimped edge of reflector and remove glass. If it busts replace it with a new piece of glass from any glass shop. Bob Grunau. Ron the way you remove the glass is by breaking it ( brutal ) you then have the new glass made to size and open up the rolled edge of the reflector a little, repair the plating and silicon glass in place, Don Lawson of this list and NEMGTR tech editor just restored a set this way, maybe Don can jump in hare and share his experience
Joe Curto
Fw: [mg-tabc] MGTC Tripods Headlights
Posted: Mon Dec 31, 2001 10:28 am
by Jennifer and Hugh Pite
#ygrps-yiv-49447379 P.ygrps-yiv-49447379MsoNormal { FONT-FAMILY:"Times New Roman";FONT-SIZE:12pt;MARGIN:0in 0in 0pt;} #ygrps-yiv-49447379 LI.ygrps-yiv-49447379MsoNormal { FONT-FAMILY:"Times New Roman";FONT-SIZE:12pt;MARGIN:0in 0in 0pt;} #ygrps-yiv-49447379 DIV.ygrps-yiv-49447379MsoNormal { FONT-FAMILY:"Times New Roman";FONT-SIZE:12pt;MARGIN:0in 0in 0pt;} #ygrps-yiv-49447379 A:link { COLOR:blue;TEXT-DECORATION:underline;} #ygrps-yiv-49447379 SPAN.ygrps-yiv-49447379MsoHyperlink { COLOR:blue;TEXT-DECORATION:underline;} #ygrps-yiv-49447379 A:visited { COLOR:blue;TEXT-DECORATION:underline;} #ygrps-yiv-49447379 SPAN.ygrps-yiv-49447379MsoHyperlinkFollowed { COLOR:blue;TEXT-DECORATION:underline;} #ygrps-yiv-49447379 P.ygrps-yiv-49447379MsoAutoSig { FONT-FAMILY:"Times New Roman";FONT-SIZE:12pt;MARGIN:0in 0in 0pt;} #ygrps-yiv-49447379 LI.ygrps-yiv-49447379MsoAutoSig { FONT-FAMILY:"Times New Roman";FONT-SIZE:12pt;MARGIN:0in 0in 0pt;} #ygrps-yiv-49447379 DIV.ygrps-yiv-49447379MsoAutoSig { FONT-FAMILY:"Times New Roman";FONT-SIZE:12pt;MARGIN:0in 0in 0pt;} #ygrps-yiv-49447379 TT { } #ygrps-yiv-49447379 SPAN.ygrps-yiv-49447379EmailStyle18 { COLOR:navy;} #ygrps-yiv-49447379 DIV.ygrps-yiv-49447379Section1 { }
Hi Bob, I agree that prying the edge is the way to go. I have found that grinding the jaws on a set of 7" vise grips so that one of the jaws has a narrow raised lip along its front edge works well. The raised lip is set against the inner edge of the grimped edge and the back jaw against the outer edge. The jaws are carefully closed and a slight rotation will lift the crimped edge. You will need to go around the headlight several times since only a little is lifted each time. Hugh Pite
-----
You don t need to break the glass, carefully pry open the crimped edge of reflector and remove glass. If it busts replace it with a new piece of glass from any glass shop. Bob Grunau. Ron the way you remove the glass is by breaking it ( brutal ) you then have the new glass made to size and open up the rolled edge of the reflector a little, repair the plating and silicon glass in place, Don Lawson of this list and NEMGTR tech editor just restored a set this way, maybe Don can jump in hare and share his experience
Joe Curto
Your use of Yahoo! Groups is subject to the
Yahoo! Terms of Service.