Page 1 of 1
Pushrods
Posted: Sun Dec 02, 2001 3:34 am
by brian bax
Does anyone know who can supply a set of TD2 shorter pushrods? I have skimmed the head on my TC engine and the push rods currently fitted are one piece so can't be shortened.Thanks,Brian
Pushrods
Posted: Sun Dec 02, 2001 6:03 am
by C Sherriff
Message text written by brian bax
>Does anyone know who can supply a set of TD2 shorter pushrods? I
have skimmed the head on my TC engine and the push rods currently
fitted are one piece so can't be shortened.Thanks,Brian
Re: Pushrods
Posted: Sun Dec 02, 2001 5:08 pm
by John T. Seim
Moss Motors offers a shorter set of Crane push-rods (8.531") vs late
TD/TF push rods effective length of 8.62". TC-early TD, length was
slightly longer. Part number is 433-335. $72.45 list price from Moss.
John Seim
Irvine, CA
Re: Pushrods
Posted: Mon Dec 03, 2001 6:04 am
by joecurto@aol.com
Brian if those are original push rods they are 3 pieces, usually there are ones that have loose ends and it would be easy to disassemble and shorten and re assemble and spot weld.
Joe
Pushrods
Posted: Mon Sep 13, 2010 12:45 pm
by Ron Benson
Hi All,
Some time ago in the UK I bought some solid pushrods for the XPAG from an
advert I believe in the Octagon magazine. As I cannot remember who I got
them off and I would like some more, I wondered if anyone one the list can
remember if there had been a batch made or if they are from another engine.
Regards,
Ron Benson
[Non-text portions of this message have been removed]
pushrods
Posted: Wed Aug 10, 2011 9:57 am
by laf48@aol.com
I am a Manton dealer.
Call me for prices.
Len
914 420 8699
[Non-text portions of this message have been removed]