Page 1 of 1
Brake rubbers
Posted: Fri Nov 16, 2001 8:11 pm
by capaciousmg@aol.com
TABC
Does anyone know of a company that supplies british brake rubbers seals for the wheel cylinders? I need larger sizes than a TC. I need 1 1/4" bore and 1 3/8" bore. I need the dust boots as well.
Joe Potter
Eugene, Oregon USA
http://hometown.aol.com/jtpaki/index.html
Re: Brake rubbers
Posted: Sat Nov 17, 2001 6:50 am
by Robert Grunau
Wagner/Lockheed supply 1 3/8 brake rubbers made in USA. I think they also supply 1 . BTW, 1 rubbers are same as MGA clutch slave rubbers so should be available from Moss. I have 6 new 1 3/8 rubbers if desperate. Also have some 1 but can t find my MGA clutch cache just now. MGA clutch slave dust boots may fit as well. Try your local Wagner UAP? Dealer. Bob Grunau TABC
Does anyone know of a company that supplies british brake rubbers seals for the wheel cylinders? I need larger sizes than a TC. I need 1 1/4" bore and 1 3/8" bore. I need the dust boots as well.
Joe Potter
Eugene, Oregon USA
http://hometown.aol.com/jtpaki/index.html>
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Brake Rubbers
Posted: Sat Nov 17, 2001 11:12 am
by Brian Rainbow
Joe,
try a UK based company called Coastings Limited. It is only a small
one man band, but Tom Robertson (the proprietor) can supply almost anything
you require in the automotive braking arena. I don't know if he is
contactable via e-mail, however his telephone number is 0044-973-710473 or
you can fax him on 0044-1564-702388 . The company is situated at Earlswood
near Solihull in the centre of England!
Best wishes, Brian Rainbow Leamington Spa, U.K. PA0777 and TA2551