Re: Rear License/D-lamp Plate
Posted: Thu Nov 15, 2001 8:21 am
Rick:
I use the Abingdon version. I believe it was designed so that the long british type license plate could be mounted between two lights. It's a bit wide better for safety reasons as the lights a closer to the outside dimensions of the car.
Ken TC 4147
Rick Starkweather wrote:
Does anyone have experience with either the Moss (451-725) or Abingdon Spares ( 65/49B ) rear license and D-lamp plates? The Abingdon version has rounded ends and will accomodate two D-lamps (according to the description). The Moss version appears to be more correct in that it has square ends, but I cannot tell if it is wide enough for two D-lamps. I received a less that satisfactory response from Moss' technical support folks yesterday, so I wanted to solicit your collective input. Rick Starkweather Scott, Madden & Associates, Inc. 919-781-4191 (office) 919-345-9871 (mobile)Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.