Wilsons Sandbox

In a message dated 11/9/01 09:49:39 Pacific Standard Time, JohnHWSteedman@aol.com writes: > I've always put it on the inside John....the convolutions toward the engine. Terry

Hi John Steering column excluder goes on the outside of the foot ramp. As you probably know it has a flimsy metal ring which helps to clamp it to the footplate. Sounds like you are making good progress. Mike Card TC-8233 Surrey, UK

----- Original Message ----- [b]From:[/b] JohnHWSteedman@aol.com [b]To:[/b] mg-tabc@yahoogroups.com [b]Sent:[/b] Friday, November 09, 2001 5:48 PM [b]Subject:[/b] [mg-tabc] Steering column draught excluder rubber Does the lip of the excluder rubber go on the outside of the foot ramp, or on the inside? My eyesight is not good enough to detect the answer from the standard reference photos. John TC0301 Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.