Page 1 of 1
Exh. Manif. Aluminum coating
Posted: Tue Oct 23, 2001 8:01 am
by Peter Pleitner
Hi Whitworth Heads of the US,
I was about to recommend Custom Aluminum Coating and Metalizing, 9030 Emnora
Lane, Huston, TX 77080; 713/465-7114 to Ken Enborg of our list and another
acquaintance. This company did mine in 1987. But as usual, a source so
old, doesn't answer their phone.
Does anyone have a recommendation for this service? I've been very happy
with the results on mine.
An while I'm on the subject of coatings, I'd also like to get my head light
reflectors re-silvered, but this time with a silica coating to prevent
tarnishing. We've had a thread going on this subject before, but possibly
before our switch to Yahoo, because I couldn't find it in the archives.
Does anyone have a recommendation for this also?
Cheers, Peter
Re: Exh. Manif. Aluminum coating
Posted: Tue Oct 23, 2001 8:18 am
by Frank O_ The Mountain
In a message dated 10/23/01 08:03:34 Pacific Daylight Time,
pleitner@dundee.net writes:
>
Here you go Peter.......excellent results!
Terry
UVIRA Laser Optics, Inc
310 Pleasant Valley Road
Merlin, Oregon 97532
503 474 5050
Uvira@terragon.com
Also if you are talking about Aluminizing, Hambro Industries did a fine job
on my SA manifolds...they are in L.A. or maybe the valley, don't have the
info on them at hand
Re: Exh. Manif. Aluminum coating
Posted: Tue Oct 23, 2001 10:41 am
by tonygoodall
Peter
Have a look at -
www.sema.org/semanews/april97/sell497.html
Tony TC9825
> From: "Peter Pleitner" pleitner@dundee.net>
> Date: Tue, 23 Oct 2001 11:03:07 -0400
> To: "T-ABCs List" mg-tabc@yahoogroups.com>
> Subject: [mg-tabc] Exh. Manif. Aluminum coating
>
> Hi Whitworth Heads of the US,
>
> I was about to recommend Custom Aluminum Coating and Metalizing, 9030 Emnora
> Lane, Huston, TX 77080; 713/465-7114 to Ken Enborg of our list and another
> acquaintance. This company did mine in 1987. But as usual, a source so
> old, doesn't answer their phone.
>
> Does anyone have a recommendation for this service? I've been very happy
> with the results on mine.
>
> An while I'm on the subject of coatings, I'd also like to get my head light
> reflectors re-silvered, but this time with a silica coating to prevent
> tarnishing. We've had a thread going on this subject before, but possibly
> before our switch to Yahoo, because I couldn't find it in the archives.
> Does anyone have a recommendation for this also?
>
> Cheers, Peter
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>