Page 1 of 1
TA Firewall holes
Posted: Sat Oct 20, 2001 12:56 pm
by Monoxidemanor@aol.com
Dear Kimberites:
Noticed that someone on the list was able to get the correct hole pattern for
their TB. We are restoring a 1937 TA roadster (non-Tickford) #1282. Firewall
is next. Does anyone know how we can obtain the correct hole pattern for the
firewall? Much obliged.
Kindest regards,
Alan & Victoria Campbell
Re: TA Firewall holes
Posted: Sat Oct 20, 2001 3:24 pm
by Ken Enborg
I am now well into the restoration process of my 1936 TA and share the same
interest in obtaining the correct hole pattern as well.
Ken Enborg
----- Original Message -----
From: Monoxidemanor@aol.com>
To: mg-tabc@yahoogroups.com>
Sent: Saturday, October 20, 2001 3:56 PM
Subject: [mg-tabc] TA Firewall holes
> Dear Kimberites:
>
> Noticed that someone on the list was able to get the correct hole pattern
for
> their TB. We are restoring a 1937 TA roadster (non-Tickford) #1282.
Firewall
> is next. Does anyone know how we can obtain the correct hole pattern for
the
> firewall? Much obliged.
>
> Kindest regards,
>
>
> Alan & Victoria Campbell
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
Re: TA Firewall holes
Posted: Sat Oct 20, 2001 3:37 pm
by JohnHWSteedman@aol.com
See page 129 of "T Series Restoration Guide" by Malcolm Green.
Cheers,
John Steedman TC 0301
TA Firewall Holes
Posted: Sat Oct 20, 2001 9:37 pm
by Monoxidemanor@aol.com
Dear Kimberites:
Thank you all for responding. We are embarrassed to find, thanks to you, that
the answer to our question was sitting on our book shelf. We are much obliged.
Kindest regards,
Alan & Victoria Campbell