EXU bumpers

[twohandlebars]

--- OK. Will I be at the New Hamphere GOF these week. Would be interested in the front brackets. In mg-tabc@yahoogroups.com, "John Bushnell" wrote:

> > I have the complete and correct rear bumper. But no front bumper at all. > > [Non-text portions of this message have been removed] >

[twohandlebars]

--- In mg-tabc@yahoogroups.com, "John Bushnell" wrote:

> > Has far has I know all EXUs came from the factor with standard bumpers. Dealers added bumpers and such to standard TCs > [Non-text portions of this message have been removed] >

[joecurto@aol.com]

I have an old magazine from the early 1950's which was a "special" issue showing many at that time accessories and wild paint schemes for T cars, Inskip in New York I believe made bumpers for TCs JOE CURTO INC _www.joecurto.com_ (http://www.joecurto.com/) joecurto@aol.com (718) 762 - 7878 -9-5 EST 22-09 126th Street College Point, NY 11356 In a message dated 6/10/2009 9:00:26 A.M. Eastern Daylight Time, harley@jorsm.com writes: --- In _mg-tabc@yahoogroupsmg-t_ (mailto:mg-tabc@yahoogroups.com) , "John Bushnell" wrote:

> > Has far has I know all EXUs came from the factor with standard bumpers.

Dealers added bumpers and such to standard TCs

> [Non-text portions of this message have been removed] >

**************Dell Inspiron 15 Laptop: Now in 6 vibrant colors! Shop Dell s full line of laptops. (http://pr.atwola.com/promoclk/100126575x1222008777x1201444407/aol?redir=http:%2F%2Fad.doubleclick.net%2Fclk%3B215566094%3B3786435 8%3Bv) [Non-text portions of this message have been removed]

[Richard A. Warren]

Does anyone know a source for bumper related hardware, specifically over-riders, for TCEXU's? I have the original bumpers, which are salvageable, but the over-riders are a mess. Thanks, Dick Warren

[SHERWOOD L PARKER]

Dick, I do not have overiders but do have a decent face bar, back bar and the 2 brackets for an EXU that are excess to my needs if you know anyone who might need them. Sherwood Parker TC 8355

----- Original Message ----- From: Richard A. Warrenrawarren@vermontel.net> To: mg-tabc@yahoogroups.commg-tabc@yahoogroups.com> Sent: Saturday, August 08, 2009 3:01 PM Subject: [mg-tabc] exu bumpers Does anyone know a source for bumper related hardware, specifically over-riders, for TCEXU's? I have the original bumpers, which are salvageable, but the over-riders are a mess. Thanks, Dick Warren [Non-text portions of this message have been removed]

[bjoerling@comcast.net]

Richard, Check with Doug Pelton of From The Frame Up . I believe he is currently looking for sufficient interest to have the overriders produced. Mine are also fubar. Michael DeRentz TC9861 EXU Broomall, PA P.S. He'll probably chime in here soon anyway. [Non-text portions of this message have been removed]

[George Wolf]

Dick and all, I have what I think is a NOS EXU overrider in the original BMC box. Be happy to send pictures. It probably would be best used as a pattern for remaking them. George Wolf - TC3452 British Auto Specialty From: mg-tabc@yahoogroups.com [mailto:mg-tabc@yahoogroups.com] On Behalf Of Richard A. Warren Sent: Saturday, August 08, 2009 6:02 PM To: mg-tabc@yahoogroups.com Subject: [mg-tabc] exu bumpers Does anyone know a source for bumper related hardware, specifically over-riders, for TCEXU's? I have the original bumpers, which are salvageable, but the over-riders are a mess. Thanks, Dick Warren [Non-text portions of this message have been removed]

[mgtc7794 .]

I'm assembling 7794's bumpers and realizing that a few parts are absent, such as license plate brackets and such. Doug Pelton has many of these bumper parts but his catalog does not include a diagram of them. Putting a picture to the part would be helpful. Perhaps someone who has done this before is aware of a schematic, or photos of EXU bumpers.

Thanks for any assistance.

Bob Brennan

S. Freeport, ME

TC 7794 EXU