Page 1 of 1
choke return springs
Posted: Tue Aug 28, 2001 7:24 pm
by Sally Carroll
OOPS Guys the article refers to everything BUT the choke return spring. . .See what I mean. An Index would be great. I have the mags and I can read and interpret drawings. I was a parts manager for *** years. We have a "helper" currently on our TF but it is in fact too stiff. . . when it gets cold we will have a starting problem as the choke is VERY tight just now. . . Sally
Re: choke return springs
Posted: Wed Aug 29, 2001 5:36 am
by joecurto@aol.com
Are we referring to the AUC 4667 choke return spring used on all T series
carbs? If so I make them to the proper spec, as for using auxiliary helper
springs these should not be needed as long as correct spring is used and as
long as the jet and jet bearings are in proper alignment not corroded etc. I
may be contacted off list regarding these springs.
Joe Curto