MPJG oil line

[Art FitzGerald]

For TA owners or TA knowledgeable folks, I need the braided oil line from the MPJG block to the 'T' connector on the firewall (I have the copper flex line from the 'T' to the gauge). Have been provided with one but it's too short. Suggestions on where to get the correct one? Many thanks for any help. Art FitzGerald

[Roger Muir]

Art FitzGerald wrote For TA owners or TA knowledgeable folks, I need the braided oil line from the MPJG block to the 'T' connector on the firewall (I have the copper flex line from the 'T' to the gauge). Have been provided with one but it's too short. Suggestions on where to get the correct one? .............................................................. Yes I had this problem as well. The one's supplied Moss etc, are fine for the XPAG but do not suit the MPJG. Check Yellow pages for suppliers of fuel and hydraulic hoses, take your presnet oil line to yhem and explain waht you need. They can usually make up something to suit your needs if not immediately then within a couple of days. Regards Roger Muir. PS Moss Abingdon NTG are usually very helpfull people, but some items we use on our cars can often be fabricated by local machine shops, or by local suppliers, bearings are a classic example, (especially if you have an old bearing to hand)