Page 1 of 1
Re TA hoods
Posted: Sun Aug 12, 2001 6:40 am
by Geoff Love
I have received several responses to my enquiry re the width of the TA
hood frame, for which I am grateful.
Now, here are a couple of additional questions for the aficionados to
ponder, although I have a good idea as to what the answer maybe.
If the TA body is narrower than the TC's, and the hood frame matches
correspondingly, is it possible to adapt the Moss Motors TC's fabric to
fit the TA frame? I am of the opinion that, unless there is some
obscure, esoteric manufacturer of TA hood covers lurking in some dark
corner of the world, it will be necessary to fabricate a custom cover.
In which case where does one obtain the correct, original type material?
And, what is it anyway?
As always, many thanks in advance for any wisdom.
Geoff Love.
Re: Re TA hoods
Posted: Sun Aug 12, 2001 6:54 am
by Frank O_ The Mountain
In a message dated 8/12/01 6:41:06 AM Pacific Daylight Time,
engconn@losch.net writes:
>
Geoff, Hoods for TA's are available in the UK. Try Naylor Bros. But they
are easily made locally. and why would one want the original type material
with shrinks and fades when StayFast is available and looks the same?
Terry
Re: Re TA hoods
Posted: Sun Aug 12, 2001 11:22 am
by tonygoodall
Geoff
There are quite a few suppliers in the UK, I used Don Trimming in
Birmingham, Fax 0121 377 7631, they advertise TA hoods made in PVC or
double duck. Collingburn can also produce in canvas or wigan, and are good
for originality, email
mcolling@globalnet.co.uk. I would be surprised if
there are no U.S. suppliers - Abingdon Spares? are they still going?
Tony TC9825
> From: Geoff Love engconn@losch.net>
> Date: Sun, 12 Aug 2001 09:42:39 -0700
> To: MG TABC mg-tabc@yahoogroups.com>
> Subject: [mg-tabc] Re TA hoods
>
> I have received several responses to my enquiry re the width of the TA
> hood frame, for which I am grateful.
>
> Now, here are a couple of additional questions for the aficionados to
> ponder, although I have a good idea as to what the answer maybe.
>
> If the TA body is narrower than the TC's, and the hood frame matches
> correspondingly, is it possible to adapt the Moss Motors TC's fabric to
> fit the TA frame? I am of the opinion that, unless there is some
> obscure, esoteric manufacturer of TA hood covers lurking in some dark
> corner of the world, it will be necessary to fabricate a custom cover.
> In which case where does one obtain the correct, original type material?
> And, what is it anyway?
>
> As always, many thanks in advance for any wisdom.
>
> Geoff Love.
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>