Stuff 4 Sale

Post Reply
joecurto@aol.com
Posts: 313
Joined: Wed Jul 19, 2000 3:42 am

Stuff 4 Sale

Post by joecurto@aol.com » Fri Jul 27, 2001 6:45 am

I have some stuff for sale if interested contact me off list : Argentina "Marshall" Supercharger 16 inch wire wheels (4) center laced, nice shape, have been redistripped. HUFF DUAL EXHAUST MANIFOLD, cast iron period accessory sold for TD/TF to allow a dual exhaust system, manifolds will fit TB, TC, TD, TF. You fabricate the exhaust system. J2 Cycle Fenders, Corey-Arnott Supercharger, believe to be for Volkswagan Joe Curto

joecurto@aol.com
Posts: 313
Joined: Wed Jul 19, 2000 3:42 am

Stuff 4 sale

Post by joecurto@aol.com » Mon Sep 17, 2001 9:46 am

Hello guys I have some cylinder liners for XPAG&XPEG engines for sale, contact me off list for pieces and prices. These are new with some surface rust on them, as they are machined "rough" this does not matter. Joe Curto

joecurto@aol.com
Posts: 313
Joined: Wed Jul 19, 2000 3:42 am

STUFF 4 SALE

Post by joecurto@aol.com » Mon May 02, 2005 2:44 pm

Hi guys I still a few original but used MG T type waterpump pulleys, these fit TB,TC,TD, TF. any interest contact me off list. I also have a TC flywheel with a decent ring gear, this needs sand blasting and a cut but is fine otherwise. Joe Curto [Non-text portions of this message have been removed]

joecurto@aol.com
Posts: 313
Joined: Wed Jul 19, 2000 3:42 am

Stuff 4 Sale

Post by joecurto@aol.com » Fri Jul 01, 2005 3:06 pm

Gentlemen I have a cache of NEW Smiths heater motor parts and clean rebuildable cores for sale they date back to the 1950's to about 1970's , I want to sell entire lot it is about a Volvo station wagon size load. If anyone is intrerested in it or knows of someone who does please contact me off list, I need the space, parts are located In Queens New York USA Joe curto [Non-text portions of this message have been removed]

joecurto@aol.com
Posts: 313
Joined: Wed Jul 19, 2000 3:42 am

Stuff 4 Sale

Post by joecurto@aol.com » Thu Aug 23, 2007 2:34 pm

Fellows I have a TC cylinder head used needing a total ?rebuild Casting number 22952 I wish to sell I also have a repro flip top valve cover?( MISSING THE COVER)? which I wish to sell ( typicial repro, corners are not crisp ) I have a TC engine block with a chunk taken out of bottom of number 2 cylinder but it looks like it could be sleeved and saved. If interested I will measure the bores and give you a rough idea on what the bore is now. Contact me off list Joe Curto ________________________________________________________________________ Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com [Non-text portions of this message have been removed]

joecurto@aol.com
Posts: 313
Joined: Wed Jul 19, 2000 3:42 am

Stuff 4 sale

Post by joecurto@aol.com » Sun Feb 05, 2012 7:39 am

I am still helping my pals widow decrease his "Stuff" she has about 20 years worth of Thoroughbred & Classic cars all bound in hard cover ( real binding) she does not want a lot for them has any one any interest give me a call Also there is a nice used but presentable MG Y Type radiator shell contact me off list if interested Joe 718 762-SUSU/7878 [Non-text portions of this message have been removed]

Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests