Wilsons Sandbox

>Thank you for the tip David. I saw that earlier today, in hopes that it was >the single flat bar type as used on my TC. Was the flat bar style a factory >option or dealer/owner installed item? Bob TC4956 > > There is rear one on ebay Item # 593153072. I have no interest in > this item and only passing on what I found. > > David Edgar, TC 5108 > El Cajon, California

----- Original Message ----- From: "David and Joyce Edgar" djedgar@pacbell.net> To: "T-ABC list" mg-tabc@yahoogroups.com> Sent: Sunday, July 08, 2001 5:19 PM Subject: Re: [mg-tabc] EXU bumper > Bob, > > I am not an expert on the EXU but I believe the rounded bumpers > (fenders) were the original EXU type and the flat were the > aftermarket type of which Inskip was one manufacturer. A search in > the Yahoo TABC list on EXU bumpers showed me this message from Mark > McCombs (message #4600) > > There were very few EXU's made, I think 496. > They had some mods specifically > for export to the US, mainly: > chrome bumpers, front and rear. The rear had > the center cast MG medallion > with red painted background and high, center > mounted tag holder. Bumpers > similar to the TD but different. > > David Edgar, TC 5108 > El Cajon, California > > >Thank you for the tip David. I saw that earlier today, in hopes that it was > >the single flat bar type as used on my TC. Was the flat bar style a factory > >option or dealer/owner installed item? Bob TC4956 > > > > > There is rear one on ebay Item # 593153072. I have no interest in > > this item and only passing on what I found. > > > > David Edgar, TC 5108 > > El Cajon, California > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > >