Page 1 of 1
MPJG DK4A A35 Distributor.
Posted: Tue Jun 05, 2001 12:42 am
by Roger Muir
Dear All.
I am trying to track down a DK4A A35 Distributor for my MPJG engine.
Hopefully from a UK source.
Failing that, has anyone experience they could pass on to me for the
renovation of this distributor.
Bushes should be easy enough to get my local machine shop to make up for
me, however what is the correct material to use.
Does any one know the correct specifications for the advance springs and a
supplier?
Any other tips?
Hopefully
Roger Muir Bromsgrove UK
Re: MPJG DK4A A35 Distributor.
Posted: Tue Jun 05, 2001 5:18 am
by erwin.lifestyle@t-online.de
Try ringing Holden on UK 01.885.488.488 and speak to Colin. Not the
cheapest, but always been very helpful in the past.
Regards
Brian Chase
-----Urspr ngliche Nachricht-----
Von: Roger Muir rogermuir@compuserve.com>
An: MG Groups mg-tabc@yahoogroups.com>
Gesendet: Dienstag, 5. Juni 2001 09:41
Betreff: [mg-tabc] MPJG DK4A A35 Distributor.
>
>
>
> Dear All.
>
> I am trying to track down a DK4A A35 Distributor for my MPJG engine.
> Hopefully from a UK source.
>
> Failing that, has anyone experience they could pass on to me for the
> renovation of this distributor.
>
>
> Bushes should be easy enough to get my local machine shop to make up for
> me, however what is the correct material to use.
>
> Does any one know the correct specifications for the advance springs and a
> supplier?
>
> Any other tips?
>
> Hopefully
>
> Roger Muir Bromsgrove UK
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>