Page 1 of 1
My Article on Steering and Chassis Set up
Posted: Mon Jun 04, 2001 5:51 am
by C Sherriff
Hi all,
Many moons ago I sat up too late one evening and wrote in defence
of TABC original steering and how to get it right.
This seems to be an ongoing problem as every so often the old chestnuts
of toe in, wedges, axles etc come out and are mulled over.
The atached articli is in fact being published in the Octagon CC Bulletin
at present ( nay - even serialised !!!) but this is it in all its totality.
If you cant read this version let me know off list and I'll try another
format.
Walter - Perhaps this should go in the Tech section if noone has any
objections?
Regards
Clive
Re: My Article on Steering and Chassis Set up
Posted: Mon Jun 04, 2001 7:28 am
by Crystal Brenner
THANKS ! Great article Clive...hope it goes in the tech. section....Very
informative indeed !
Cheers,
Crystal and John TB#0398
----- Original Message -----
From: "C Sherriff" 100070.740@compuserve.com>
Cc: "[unknown]" mg-tabc@yahoogroups.com>
Sent: Monday, June 04, 2001 8:50 AM
Subject: [mg-tabc] My Article on Steering and Chassis Set up
> Hi all,
>
> Many moons ago I sat up too late one evening and wrote in defence
> of TABC original steering and how to get it right.
>
> This seems to be an ongoing problem as every so often the old chestnuts
> of toe in, wedges, axles etc come out and are mulled over.
>
> The atached articli is in fact being published in the Octagon CC Bulletin
> at present ( nay - even serialised !!!) but this is it in all its
totality.
>
> If you cant read this version let me know off list and I'll try another
> format.
>
> Walter - Perhaps this should go in the Tech section if noone has any
> objections?
>
> Regards
>
> Clive
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>