Page 1 of 1
Mounting Seat Tracks & Hid'em Binding
Posted: Tue May 29, 2001 5:29 am
by Mark Stolzenburg
The seat tracks look as though they mount with three flathead machine screw drilled through the floorboards for each track. Is there any re-enforcement (metal or wood) under the floorboard where the seat tracks attach?
When installing the upholstery panels how is the best way to "end" the hid'em binding so you get finished look? Do you fold it under the panel before you tack the panel in place?
Thanks,
Mark Stolzenburg
Re: Mounting Seat Tracks & Hid'em Binding
Posted: Tue May 29, 2001 6:04 am
by Want1937hd@aol.com
Mark, My seat tracks are held in place with three wood screws directly to the
plywood. There is no reinforcement, these tracks are original and I'll be the
first to remove them. Bob TC4946
Re: Mounting Seat Tracks & Hid'em Binding
Posted: Tue May 29, 2001 6:20 am
by Dean Jensen
Mark You are correct on the screws, there is no re-enforcing under the underside. As to the hid-em that is the way I did it. Cheers Dean
----- Original Message ----- [b]From:[/b]
stolzy40@peoplepc.com [b]To:[/b]
mg-tabc@yahoogroups.com [b]Sent:[/b] Tuesday, May 29, 2001 7:29 AM [b]Subject:[/b] [mg-tabc] Mounting Seat Tracks & Hid'em Binding
The seat tracks look as though they mount with three flathead machine screw drilled through the floorboards for each track. Is there any re-enforcement (metal or wood) under the floorboard where the seat tracks attach? When installing the upholstery panels how is the best way to "end" the hid'em binding so you get finished look? Do you fold it under the panel before you tack the panel in place? Thanks, Mark Stolzenburg
Your use of Yahoo! Groups is subject to the
Yahoo! Terms of Service.