Wilsons Sandbox

Posted: **Mon Apr 30, 2001 2:02 pm**

After I posted my last question about a "correct looking" shade of silver for the wire wheels Rob Johnson of the List suggested I contact British Wire Wheel and ask them what they used. I must admit I was a little hesitant thinking they might consider it a sort of ...confidential trade information.. I was very pleasantly surprised when the next day the company sent out the information. Good show for them. I will be sending another message thanking them for sharing this. Rob Greaves

----- Original Message ----- From: "British Wire Wheel -- Jim Judd" sales@britishwirewheel.com> To: t.greaves@hyperlinx.net> Sent: Monday, April 30, 2001 2:00 PM Subject: Paint for wire wheels > Hi Rob. Dayton uses an acrylic enamel made by Dupont. It is known as: > Dupont 44716-A, Silver-Gray. > > Jim Judd - British Wire Wheel > > > ----- Original Message ----- > From: sales@britishwirewheel.com> > To: sales@britishwirewheel.com> > I have bought a 1949 MGTC and I need to paint the > silver metal spoke wheels. Would you mind telling me the type/colour code > of the paint you use. I assume you use a pretty tough paint like a > urethane? Thankyou, > > > > Rob Greaves > >

Posted: **Mon Apr 30, 2001 5:13 pm**

Dear Rob ; Do you want to share your inside info? Tally Ho! Thom Collins

Posted: **Mon Apr 30, 2001 7:58 pm**

In a message dated 4/30/01 4:12:43 PM Central Daylight Time, t.greaves@hyperlinx.net writes:

I was very pleasantly surprised when the next day the company sent out the information.

So, what was the information? Can you share it?

Posted: **Mon Apr 30, 2001 9:20 pm**

For those that did not read the complete message from Rob, the message from British Wire Wheel was included after Robs message. I copied it and include it below. Read on for the color code. David Edgar, TC 5108 El Cajon, California (and no chrome fenders) (nor chrome wheels)

----- Original Message ----- From: "British Wire Wheel -- Jim Judd" sales@britishwirewheel.com> To: t.greaves@hyperlinx.net> Sent: Monday, April 30, 2001 2:00 PM Subject: Paint for wire wheels > Hi Rob. Dayton uses an acrylic enamel made by Dupont. It is known as: > Dupont 44716-A, Silver-Gray. > > Jim Judd - British Wire Wheel

Posted: **Tue May 01, 2001 2:55 am**

I have had a couple messages..people asking what the response from British Wire Wheel was. I had included their response in my message. To repeat..Jim Judd from British Wire Wheel stated that they use a Dupont acrylic enamel 44716-A "Silver-Gray" Rob Greaves

----- Original Message ----- [b]From:[/b] Emgeeguy@aol.com [b]To:[/b] t.greaves@hyperlinx.net ; mg-tabc@yahoogroups.com [b]Sent:[/b] Monday, April 30, 2001 10:58 PM [b]Subject:[/b] Re: [mg-tabc] Fw: Paint for wire wheels In a message dated 4/30/01 4:12:43 PM Central Daylight Time, t.greaves@hyperlinx.net writes: I was very pleasantly surprised when the next day the company sent out the information.

So, what was the information? Can you share it?

Wilsons Sandbox

Fw: Paint for wire wheels

Fw: Paint for wire wheels

Re: Fw: Paint for wire wheels

Re: Fw: Paint for wire wheels

Re: Fw: Paint for wire wheels

Re: Fw: Paint for wire wheels