Wilsons Sandbox

My experience has been exactly the opposite - and with a number of respected suppliers doing the work too.. A Badger, however, must be able to get it to Sett better............!!!!! Clive ======================================== Message text written by mrbadger

>I have been using the powder coating process on disc wheels, wire

wheels, alloy mag wheels, suspension parts, springs, engine parts such as valve covers and brackets, motorcycle frames, even entire automobile chassis for at least twenty years. I find it to be a superb and durable finish, highly resistant to chipping and scratching. In addition, the nature of the application process insures an even coating of material, regardless of corners or knife edges or valleys and difficult to reach areas. I have personally used it with great success on parts exposed to water, snow, and salt with no problems and I recommend it especially for any parts exposed to this kind of service as being far superior to any other paint surface. Badger, who prefers long lasting low maintenance finishes.