Page 1 of 1
TA Oil Pump
Posted: Wed Apr 18, 2001 6:47 am
by Roger Muir
Have any of our UK contingent possibly have an oil pump for an MPJG engine.
Condition,provided it is not too rough, not important as I will have it
overhauled.
Regards Roger Muir (Bromsgrove UK)
TA Oil Pump
Posted: Sat Mar 01, 2003 6:24 pm
by Dean Jensen
Does anyone know of someone selling replacement gears for the MPJG oil
pump? Has anyone had any experience modifying the pump. At first
glance, it appears to me that the gears used in the TC engines are
similar, it look like the only difference is the length, with the TC
being longer, is it possible to shorten the TC gear to make them fit or
work. Any and all suggestion would be appreciated, if you have had any
experience rebuilding the oil pump on the TA engine. Dean
[Non-text portions of this message have been removed]
TA Oil Pump
Posted: Sun Mar 02, 2003 12:07 pm
by Brian J Rainbow
Dean,
Steven Brookes of SES Engineering rebuilds TA oil pumps, he makes new gears etc and machines the housing. He rebuilt one for me a while ago. However you may have to wait a while before he can do it, as he waits until he has about 10 pumps to rebuild before setting his machine up to do it. The charge was around 95 UK Pounds last time I had one done. He rebuilds VA pumps as well aand would probably do TC oil pumps. His website is
www.sesparts.freeuk.com and a contact e-mail address can be found there.
Best wishes, Brian Rainbow, Leamington Spa, U.K. TA2551
[Non-text portions of this message have been removed]
Re: TA Oil Pump
Posted: Mon Mar 03, 2003 1:03 am
by i.thomson@talk21.com
I expect any competent engineering firm would be able to shorten the gears but I expect they would have to grind them to size as they are hardened.
Ian Thomson.
-------------------
--------------------
talk21 your FREE portable and private address on the net at
http://www.talk21.com
TA oil pump
Posted: Thu May 21, 2015 6:09 am
by Doug Pelton
I am looking for a TA oil pump shaft with driving gear. Does anyone have
excess or know of a source?
Thanks,
Doug Pelton
FROM THE FRAME UP, LLC
www.FromTheFrameUp.com
480-588-8185
Please note:
Like us on FACEBOOK
For fastest service for orders, email to:
order@FromTheFrameUp.com
TA Oil Pump
Posted: Thu Feb 25, 2016 4:43 am
by 1947 MGTC
>
> Hi,
>
> The rebuild of the engine on TA 2335 is starting the reassembly phase. I have not as yet sourced a rebuild for the oil pump; specifically I d like to find new gears if possible. Might anyone have any suggestions?
> Thank you.
>
> Cheers,
>
> Mark O Day
> Kensington, NH, USA
> TA 2335
> TC 2218
> YA 1392
> TD 19976