Re: Drip which Simply Will Not Go Away
Posted: Thu Mar 08, 2001 8:08 am
Hi Bohrturm,
I followed your instructions below. I find a file folder but no "hot spot"
for the persistant leak. The MG piston hot spot works ok.
I modified my XPAG block for the small block Chevrolet seal
(Bradley's article) this past September with success.
All the best....
Bill Traill
Santa Clara, California US
> The notification just delivered to the MG-TABC list by YahooGroups > contains an address that spills over onto several lines for some of us. > > That means that clicking on the address diverts one to an error page > instead of taking one to the YahooGroups page containing MG-TABC > "Files." > > Rather than copying and pasting several pieces together from that > message, the simple way to get there is to click on this shortened > address: > > http://groups.yahoo.com/group/mg-tabc/files > > This leads to the Files page, > where you will find a folder containing > The Pefect Cure for the Persistent Drip. > > Click on the hotspot of the folder to look for anything interesting to > you in the matter of this nagging nuisance--or to add some thing of your > own. While you are there you may add anything relevant to that issue > which you would care to share with the rest of us. > > If you've not vaulted the hurdle already > of working your way onto the YahooGroups page for MG-TABC, > just send me a note and I'll gladly send you a snapshot of the quick and > clean solution to The Drip that Simply Will Not Go Away in a return of > your message to me. > > Bohrturm Thirst > "der Dachsjaeger" >