Wilsons Sandbox

Couper states 5/8W (can use 1-1/8 SAE). www.mgcars.org.uk/mgtd/mgtd_bolts.htm DAI --- Tom Poole tpoole@columbus.rr.com> wrote: > Anyone know the correct socket size for the

> crankshaft pulley bolt re. "dog nut" on a TC? I am > attempting to remove the Judson double pulley that I > put on two years ago and now I can't remember the > size or find one that fits. Thanks, Tom poole TC > 7563 >

__________________________________________________ Do You Yahoo!? Yahoo! Auctions - Buy the things you want at great prices. http://auctions.yahoo.com/

Tom: A 1 1/8" american socket fits just fine!!!!! Skip Kelsey................ At 03:49 AM 1/29/01, Tom Poole wrote:

>Anyone know the correct socket size for the crankshaft pulley bolt re. >"dog nut" on a TC? I am attempting to remove the Judson double pulley that >I put on two years ago and now I can't remember the size or find one that >fits. Thanks, Tom poole TC 7563

Tom (and anyone else attempting this!) this ol' dog can be mighty tight! you will need a long (4' or more) tommy-bar, and some way of locking the crank. I don't like using the transmission for this, for obvious reasons. with the sump off its easy, otherwise lock up the starter ring gear with a very strong screwdriver. and in case it lets go with a bang, plan where that bar is going to end up (preferably not denting your O/S front wing or your chin...) ocTagonally Roger

>A 1 1/8" american socket fits just fine!!!!! > >Skip Kelsey................ > > > >At 03:49 AM 1/29/01, Tom Poole wrote: >>Anyone know the correct socket size for the crankshaft pulley bolt re. >>"dog nut" on a TC? I am attempting to remove the Judson double pulley that >>I put on two years ago and now I can't remember the size or find one that >>fits. Thanks, Tom poole TC 7563 > > > > > > >

Thanks all for the fast responses and references. regarding my dog nut question...Jim Davis TC7225 === Posted through Grouply Create your own group! www.grouply.com .. . .. . .. . .. .. ... .... . . . ... . .. ... . ________________________________________ type_D . ... .. . ... . . . .... ... .. .. . .. . .. . .. [Non-text portions of this message have been removed]